Summary: I just finished installing a used hard drive in a 486 for my daughter. The cmos autodetects it on drive d: but it is suppose to be on c:, it has no cd...
Summary: Hello! A while ago I spent a whole night but managed to install a new hard drive (80Gb Western Digital) on a very old mother board (ASUS P/I-P55T2P4 a...
Summary: Alright, well I have both my CD-ROM and HD on the same IDE cable in the 2nd IDE slot on the motherboard, and it seems to be working fine now, so we'll...
Summary: Trying to install a WD Caviar 160 GB HD on a PII system from 1997. I can get the XP setup started however when it goes to restart to continue the inst...
Summary: I upgraded the bios and still no luck. I tried the HD on another system and the same problem. When I set the bios settings to manual and enter the sp...
Summary: When I attempt to connect my external HD to my laptop I get an access denied and the file system comes up as RAW when I look under properties. Origina...
Summary: "No OS" message on boot, clicking from HD, I assume I need a new HD on my Toshiba Satellite 1695CDT. Have taken all short and long screws from case bo...
Summary: Did you install the SATA drivers when you first installed the MBoard and the OS? Do you have all IDE channels enabled in the BIOS? Do you have an op...
Summary: Thanks for the reply. Here's the thing. This "old" hard drive is actually a Maxtor 60g drive, exactly the same type as the new hd I will be getting in...
Summary: Hi, I have the follwing system :Manufacturer: Dell inc. Model: Mxg071 OS: Microsoft Windows Vista Ultimate CPU/Ram: 3.4 GHz / 3069 MB Video Card: NVID...
Summary: This problem is hard to describe, so please bear with me. I purchased a new system in January of this year and I've been having this problem--on and ...
Summary: Not sure why the machine info showed up wrong. It's a custom built w/ a dual core Intel 2GHz cpu, MSI P6NGM-L motherboard, 1 Kingston DDR2 667 stick,...
Summary: This is strange... Does anyone have any experience with the Primary HD controller failing, then causing the HD to fail??? Then putting that bad HD on ...
Summary: 3 weeks ago I had to clean install without data loss windows xp, this kept all my programs intact. I can’t remember if I installed the drivers for...
Summary: I just installed an epox 8rda3+ motherboard (rev 2), and I can't for the life of me get it to recognize my Hewlett Packard CD Writer plus. I also have...
Summary: I added a second HD under XP. My first HD has a Fat 32 partition, but being that I'm going to do a lot of video editing I chose to make the new HD a N...
Summary: A working Master Samsung 80GB Hard disk running WinXP was installed as a slave in another computer for data transfer. The HD was wrongly jumpered to ...
Summary: Ok for those of you who remmeber I posted the other day about my newly built computer shutting off at bios, turns out i needed more thermal gel. Anyho...
Summary: What would be on a HD that would prevent the bios from seeing it? I know the cables is good because it will detect other hd when installed How can I f...
Summary: I cant seem to mount my NTFS External Seagate Harddrive on other computers. The only one it will work on is my main desktop which I'm using right now....
Summary: Yes I have SP4 installed. The latest update is as follows: I moved the drives back where they were (120GB on the promise card, and the 180GB back on I...
Summary: HI i just bought a new WD 200 GB HD. The computer detects it on startup, primary/secondary, master/slave ect.. and in windows it is listed under the d...
Summary: Hi, I really need answers for these questions: 1. I'm planning to add a 120 GB HD on my P3BF. Is there any problem I should aware of? eg.: Processor...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
