Summary: Any issues in underclocking the frequency of a CPU? I note that some 133FSB processors are cheaper than 100FSB's and thinking of using a fast cheaper ...
Summary: If you are clocking at 1200MHz with the FSB at 100MHz, you have a FSB 100/200 CPU. If you clock at 902MHz, you have a FSB 133/266 CPU. Durons are FS...
Summary: cant get fsb to run at 133 cpu : ath 2000+ mb : ga-7vrxp ram: TwinMos PC2700 333mhz no idea why! when i tried to set the dip switch on the mb and the...
Summary: Hi, I've upgraded my computer's original Pentium 100mhz processor to a 133mhz, but the strange thing is it still appears to be running at 100mhz. The...
Summary: Ok I am havig a very weird problem. I just reformated and everythig to start over new. System specs: AMD XP 2400+ Soyo KT600 Plus 512MB PC3200 (if y...
Summary: I have a Duron 1100Mhz CPU and a PC Chips Motherbaord M810L v7.1c In the bios setup. i can't change the multipler (it's locked at 11). And also the ...
Summary: Hi, I have a reasonably dated Asus A7V-E mobo and an Athlon 1Ghz (1009)T-bird CPU. My mobo has KT133 but SiSoftSandra is reporting that my FSB is runn...
Summary: Say you have a 3.2ghz p4, 800fsb. The doorway of the cpu is 64 bits wide. It can let in 64x800,000,000 bits in a second. The path entering the cpu i...
Summary: Dude, you have to know the make/model of the motherboard. Then go to the manufacturer's website & see what you can find out...they normally have a CPU...
Summary: Even if it only supports 200 Mhz it should work. Its just that the chip will be clocked lower, because the FSB is 133 Mhz lower. So if you have a 12...
Summary: The Athlon 1.3 GHz 200 FSB should have a locked multiplier of 13X. The Athlon 1.33GHz 266FSB should have a multiplier locked at 10X. If your FSB is ...
Summary: Hi All, Apologises before I start.... I am a novice when it comes to upgrading pc's and I am desperately seeking all your advises. I am wanting to upg...
Summary: Can you set FSB with a jumper AND in CMOS? If so, they should be the same or the CMOS setting should be "AUTO". With my MOBO (Gigabyte), you can set t...
Summary: I have an XP1800 in an ECS K7S5A M/B. It runs just fine as long as the FSB is set at 100Mhz. I can set the DDR ram to run at 133 or 100 as long as the...
Summary: Lol guys did you read what specs he has? I thought not. He has pc2700 ram which is meant to run at 166mhz and because he isn't an overclocker i bet he...
Summary: They're basically the same thing, but it's much less confusing if you refer to them as they're actual clock settings, rather than the double-pumped or...
Summary: Jam, You asked some good questions. "So memory is running in sync at 333MHz (DDR667), CPU at 333MHz (1333MHz FSB), PCI-e at 100MHz, etc?" Everything y...
Summary: If it's a P1, it's a socket 5 or socket 7 board. If you're just playing with it to see how much you can squeeze out or it, that's one thing...but if y...
Summary: Generally, the higher the FSB, the better overall system performance will be...so if your system is stable at 136Mhz FSB, that's what I'd go with. I a...
Summary: Ok real_cool. The reason I was saying this is because it was information I gleemed earlier today, from some people here. Ans as you may notice, I put ...
Summary: the FSB is locked at 100mhz. I am basically looking for a second opinion just to make sure if I need to get a new mobo. Another thing is to overclock ...
Summary: I have a pc chips M590 Motherboard that is meant to support 100Mhz FSB but when you set it in bios to run at 100Mhz when you use a program like Wcpuid...
Summary: 110 F = 43 C. That’s a good temp for this CPU. 250W is a small PSU for this project. Your CPU multiplier is locked at 11.5X so a clock speed of 1150M...
Summary: The multiplier for the athlon xp 1700+ is 11 and has a FSB of 133.33 mhz which gives you 1.47ghz (11*133.33 = 1466mhz) The athlon xp1700+ doesnt actua...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
