Summary: I was looking at OS and I meet all the requirements except clocked speed. I have a 466MHz computer with 128MB-RAM and 10GB hard drive with a clocked ...
Summary: Hi matt: Unless you know if the dip switch settings for DX2-66 don't try it. You need to change the clock speed from 2 x 25mhz to 2 x 33mhz to work, i...
Summary: Short for Synchronous DRAM, a new type of DRAM that can run at much higher clock speeds than conventional memory. SDRAM actually synchronizes itself w...
Summary: I have a laptop with the following spec… 486dx Processor Clock speed of 33mhz 500MB hard drive 20mb Ram Dos 6 Works for Windows version 3.11 Apart fro...
Summary: Most 486 boards were physically incapable of taking a Pentium processor - different sockets (Socket 3 instead of Socket 5 or 7). Changing 486 processo...
Summary: Hi folks I've recently been busying myself with an ancient 486 system to see how much I can squeeze out of the wee thing. It currently runs Win3.1. ...
Summary: Everyone, I have an IBM/PS1. It has 32 MB memory, two hard drives 253 MB (the original) and the other hard drive 2,555 MB. It has a 486SX2 chip, 50 MH...
Summary: Just a FWIW: IBM released a Year 2000 update for PCDOS7, available here: ftp://ftp.software.ibm.com/ps/products/dos/fixes/dos7.0/year2000/ When instal...
Summary: Sounds like a software glitch, if it doing exactly the same thing on 2 totally different systems.. moreover 95a will not work on the K6 at 500mhz you ...
Summary: Hi Dave the Snake: Have you checked you floppy drive & ribbon cable on a different PC, if it doesn't work then you know that is the problem. If they w...
Summary: I'm getting ready to put Win95 on friend's Tandy 386. I've got this old processor I've never been able to get the exact specs for. I've gathered fro...
Summary: dear stu, if you take your cpu out altogether, and turn the computer on, it will still turn the power supply LED on; the monitor will also do just wha...
Summary: Hey Guys im continuing a thread i saw earlier about who haws the best 486 and windows 3.11. Mine has Win95A, but i really want to show it off to some ...
Summary: Thanks for the post, it was interesting. I had "some" idea about much of it, but I didn't know MS was still providing support up until a few days ago...
Summary: nnpocse is correct and exact I had 2 amd 5x86 boards both also had pci slots one even had a vlb slot and 72 pin ram slots. amd also made a 486-120 ...
Summary: I had a 66 chip running at 75mhz by setting it to 25 and triple clocking it (thats how dx/4 chips get clocked) but i noticed no speed increase at all ...
Summary: the high speed isp servers won't work with such an old computer. that lapper hasn't enough memory or clock sped to connect, . and, i doubt the modem i...
Summary: I don't know what verison of windows you'll useing.I'll say 3.1 or 311.the video card shares the memmory with your system. If you got 4mg memory chit ...
Summary: i have pc dos 7 with win 3.11wfw it is running on a old 386 laptop with a 324.21 meg harddrive everything works fine i have added some addons like cal...
Summary: I just popped this Intel Overdirve dx4\100 into my socket3. My computer is a H.P. Vectra VL2 4/50. On startup, it runs the system diagnostic test and ...
Summary: These machines you talk about, good as they are! use them to bring the world to peace at speeds of up to and including 8Mhz! Im selling one for 300 o...
Summary: How i can find the jumper to turn down the cpu's speed?(the BUS FReQUENCI'S JUMPER) Anybody send me an image of motherboard!! I already have an AWARD ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
