Summary: Well first thing: don't run chkdsk over the partition. Use it only as a last resort - it tends to solidify existing problems. If it's really worth the...
Summary: The command is REMmed out at install time, but I always enable it for the no logical reason. I have yet to try something like this; however, if you wi...
Summary: OS/2 by default tries to make the system look the same as it was before. this includes restarting of applications and restoring any network connection...
Summary: You need to upgrade the Warp 3 installation diskettes so that it will install on hard drives larger that 4 gigs. Partition Magic is not always friendl...
Summary: Either the CD is bad or the CD drive read it bad. Clean the CD with water and try again. If the problem is still there then there is probably little y...
Summary: These are caused by bad ram chips or too many applications running at the same time. try to limit open apps to 2 or 3. When is the last time you cle...
Summary: Hi !!! I have installed WinXP SWE Pro on the clean partition.It is only OS on the comp.When I start the comp the blue screen appears whit bad_system_...
Summary: Hi Armin, agree that there has been some development on the product but you will notice that this has all taken place around the "support" area and h...
Summary: Because of consistent WIN98SE crashes, I'm looking at upgrading to Win2k, but I'm aware of the problems with boot manager. And I just resolved the pr...
Summary: Hobbes is another OS/2 resource that you should visit at: " http://hobbes.nmsu.edu/ ". Can you install Warp V4 from V3? I don't think so. I recall th...
Summary: I got an old version of OS2 version I believe 2.1 from off of E-BAY. When I put in disk 1 which is bootable it boots the computer & then says "The cou...
Summary: well... Do you use windows98? or XP? maybe...windows NT 4.0 or windows 2000 will not pass someone by press 'cancel' .. I think...os/2 is not multi use...
Summary: Well, I got most of the Data/Audio-CD Creator to work, except for grabbing cd tracks and converting them to MP3. My box (WSeB) hangs, then craps out w...
Summary: Cindy, you're definetely in the wrong forum - we don't do Windows here. That aside, why don't you just try it? If you really have nothing important on...
Summary: Hello,I had WinDat but I had to have my computer cleaned out and I lost everything,I really loved having it and I would appreciate it if you could sen...
Summary: Get this. SP3 for W2K on D: partition failed, thus causing havoc when trying to use W2K Repair off CD. I then go and try to clean off W2K and then re...
Summary: HELP Here is my system configuration: Win95 mmxII 1 hard drives. Win 95 on drive C with no extra partitions 32 megs of memory This is how the problem...
Summary: I have been trying to install Warp 4 and 3 Connect on two different machines, mainly my Compaq Presario 1625(modified): AMD K/6-2 450MHz, 96MB RAM, 20...
Summary: I had the same problem installing OS/2 2.1 and it was cause by other partitions on my disk like i had a win 95 partition and it continued with that er...
Summary: Sorry I'm late to the party. Anytime I get that err, is that either my cable wasn't detected or the card died. Try the following: Remove the NIC from ...
Summary: Hello Bonnie, I don't know what is error 1010, but try this: -check for virus -check for a properly IE 5.5 installation. if all looks well, trying to ...
Summary: I had a similar problem with a friend's pc a few years back. Turned out that the on-board video card was causing the problem. I used to like warp but ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
