Summary: Need help with my network set up. I have a Cisco PIX 501 connected to my Cable router and a Linksys wireless router WRT54G connected to my Cisco PIX 5...
Summary: I have the pix (501 v6.2(2) PDM 2.1 (1)) setup and running as a DHCP server, and is configured – I used Terminal emulation to reset to default befor...
Summary: Hi All I was wondering if anybody knew how to restore the default settings on a PIX 501 firewall? i have already entered the default settings from one...
Summary: I have two pix 501 firewall which i want to configure at 2 different location. Both location has got STATIC IP. I would like to create VPN tunnel. Can...
Summary: This is the existing setup I have walked into, I did not set it up but need to fix it. Ok here we go, first their is a cisco pix 501 that handles the ...
Summary: Hi. I am trying to setup a cisco pix 501 firewall on our network and allow remote users to vpn to the internal Windows Server 2003 network. I have no...
Summary: Hi! I do have an wireless Linksys WRT54G router/accesspoint/gateway in my existing network. I have now installed an broadband connection from my loca...
Summary: Hello, I have a house that has thick walls and can not get a good wifi connection on the second floor. There is a single ethernet connection that runs...
Summary: Here is the scoop. I been working with cisco products for the past 7 years, and lately I been deploying the pix 501 in a nationwide project. So I ca...
Summary: We are going to add additional T1, currently I have couple servers on 10.230.20.X network. *************************************************** ISP -> ...
Summary: Hi, wonder if anyne can help? I'm running a LinkSys WRT54g router off of 192.168.2.1 and a LinkSys ADSL modem (ADSL2MUE) off of 192.168.1.1 both confi...
Summary: could not configure the default inside interface of the PIX 501 FW (192.168.1.1). Everytime i try to change it, it will say it is not within the DHC...
Summary: I have a Linksys wrt54g wireless router and am trying to get ics to work with it and after failing called Linksys and they said that the router is not...
Summary: Ok- So heres my situation. I already had a wired linksys router a long time ago and it always dropped my connection, on and off. So I got a d-link and...
Summary: Which is better, a Netgear WGR614 router ($40) or Linksys WRT54G router ($61)? My ISP is Comcast 3000 kbps/ 256 kbps. I don't have any computers that ...
Summary: Hi everyone, I need your help. I bought a Linksys WRT54G wireless router less than 2 weeks ago, and I tried to setup for sharing the cable internet, ...
Summary: Hi all, I have a Linksys WRT54GS Router/WAP setup on my cable modem. My desktop has a WMP54GS wireless nic installed and I can see the router and get ...
Summary: I bought a linksys WRT54G wireless router to set up a home-network to share one comcast cable internet service among three computers. For the first h...
Summary: I have a Win2K server with VPN installed behind a Cisco PIX 515 Firewall, I can log into the VPN no problem from inside the network but not from outsi...
Summary: Hi, I recently bought a Linksys WRT54G Wireless router and was wondering how to maximize its signal strengh. Where is the best place to put the rout...
Summary: We have a cisco pix router and a site to site vpn setup. I want to enable someone to use REMOTE DESKTOP CONNECTION to connect to the server from outs...
Summary: I am currently having a problem with my new wireless network. Everything works fine apart from the internet which is often slow or not responding i av...
Summary: About a month ago I purchased a Linksys WRT54GS router. It was working beautifully and then about three days ago it starting dropping all connections ...
Summary: Just installed the LinkSys WRT54G to the cable modem (Comcast), one ethernet PC running XP and one notebook with built in wireless adapter. The connec...
Summary: I just noticed I have a Linksys WRT54G 2.02.7 router firmware and I was wondering where the place to be to get official (not 3rd party no offense) fi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
