Summary: Hi All, Just wondering if it is possible to bridge two networks using a Cisco 1601 router. I guess that the answer is no as there is only one etherne...
Summary: During an ill fated password recovery on a Cisco 1601 Router I put in a wrong statement for a register setting. I assume that this is my problem but ...
Summary: We have 60 cisco 1601 routers in our bank.We want to add another ethernet port for our VSAT terminals.Is it possible to install any card in the WAN sl...
Summary: I have a Polycomm router hosting a T1 connection now and I'm trying to connect a Cisco 1601 in place of the Ploycomm with very little success. The Po...
Summary: Hi All, We have 30 Cisco 1601 routers(1 ethernet & 1 serial) in our branch offices. We want to install VSAT terminals in these branch offices.We use t...
Summary: Ok, question for all the Cisco folks. I purchased a Cisco 1417 router on ebay to replace the router provided to me by my ISP (A 2Wire Wireless GW rou...
Summary: Hi All, I have a Cisco 1605 router that connects two networks. Each ethernet port has been configured for the networks (IP/subnet), I have enabled IP...
Summary: when i console into my cisco 2600 router it goes directly to the 'password:' prompt; the 'router>' prompt never appears. i don't know any of the pass...
Summary: I have a cisco 1700 router connected to my pc by console cable. It display the router information and then Self decompressing the Image ##### Comes up...
Summary: We have a Cisco 760 router connecting our small Win98 TCP/IP network to the internet (users have static IP addresses). I am looking for a program to ...
Summary: I am setting up a WAN with 2 cisco 1720 routers on a 256 leased line. In the configuration manual, there does not seem to be much info as far as sett...
Summary: I have a Cisco 1600 router with the Cisco RJ-45 connector cable hooked up to my PC. I realize you can telnet to it, but I don't know the IP of the ro...
Summary: I have a Cisco 1721 router with a 10base T LAN WIC. I want to configure the router to route LAN traffice as well as bridge 2 seperate subnets. Can any...
Summary: Ive just set up a router (Cisco761M) through a hub to connect to the internet via ISDN, I am the only user on the hub. I use WinXP, my problem is as f...
Summary: My school division has just installed DSL in our schools. They provided us with a Cisco 827 Router. Everything hooked up fine and we are happy surfe...
Summary: Hello I have purchased 2 Cisco 1720 Routers with WIC 1DSU T1's in them. I have a T1 Circuit from the Phone Company, How do I configure the Serial Inte...
Summary: I Have a Cisco 1700 router with a serial interface connected to a PPP Connection, and a ehternet interface connected to a switch. I also have a netgea...
Summary: We have a small LAN with an NT server and a, cisco 1601 router to the outside world. The router connects to an ISDN line and to another router which c...
Summary: I'm currently working on a project that includes installation and configuration of 2 Cisco 1602 routers connected via a Qwest Point-to-Point T1 line. ...
Summary: Can anyone help? I have a cisco 1700 router connected to a T1 line on the Wan side and a LAN side connected to a D-link office firewall also acting as...
Summary: Hello everybody, I recently purchased a cisco 1700 router on Ebay. I got it today and it's password protected!! I bought it cuz I'm a Cisco student an...
Summary: Hi all, I'm hoping to get some help regarding a problem I'm having with an access control list on a Cisco 1710 router I have. I have a route map call...
Summary: cisco 1841 router( ie router 1) 2 pair coper conectivy ( we can connect f0/0 copper wire and other f0/1 to Switch )other end of cisco1841 router ( ...
Summary: Hi, What is the model of your Cisco Linksys router? Are both computers connected to your router using a wireless or wired connection? I'm assuming wir...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
