Summary: hi, I want to know how to change the IP address of the netware 4.11 server knowing that I already made these steps: Load inetcfg, Protocols, TCP/IP , ...
Summary: To whomever: Is there any known tools that will help with the changing of IP's and also are there any tools to help with migrating a Novell Server 4.1...
Summary: You need supervisor rights. Go into the System Console (syscon in a DOS/CMD window). Choose Supervisor options, Edit Autoexec.ncf. Look for a line s...
Summary: Howdy, I am currently upgrading a small public school district's Novell setup. They have 4 4.11 file servers with TCP/IP and NW/IP installed and one ...
Summary: Hi, Like to check with all expert on how to insert new ip address to my novell 4.11 server. Do i use inetcfg? add the line in autoexec.ncf or both? P...
Summary: at the NetWare command prompt: INETCFG From the Internetworking Configuration menu - select Protocols From the Protocol Configuration menu - select TC...
Summary: Our company has 30 public IP address, but we can access only 5. We are running a Novell Netware Server and BorderManager fire wall. We cannot even pin...
Summary: We are going to have an ADSL connection to the Internet which means a static IP address needs to be set on our File Server which runs Groupwise Intern...
Summary: Ok now i know I am having a brain Fart here but i can not put my finger on this no matter how hard I try. I am trying to install netware4.11 on a AMD ...
Summary: Hello, I m new to novell and have setup netware 6 in my lab and installed sp3. Now I want to change the IP address, but when I run the inetcfg comman...
Summary: I just loaded a 5x server using the 50 person liscense disk. Now I am being warned to load the server license. I have two floppys. HOw do I load the s...
Summary: Please help, i know nothing about netware but am dutifully trying to build up a netware 4.11 server. I've got the server and NDS tree installed but ca...
Summary: We installed SP5 for NW6 over the weekend - since then most users are having trouble logging on, if they change the server from Itchy to Itchy's ip ad...
Summary: How to assign Ip address in Novell Netware 4.11 server. I have enable TCP/IP in INETCFG command. Can you help me out to assign IP address for the Netw...
Summary: We currently have 2 T1's and the version of Novell was not really the issues for us. In my opinion, it's far more important to make decisions on the ...
Summary: We have 2-12 port Shoreline phone switches and 1-24 port Shoreline phone switch that are run by an NT server located at one site on our network. At a...
Summary: I just installed Novell Netware 5.1. After entering "Enter the server name". It now asks "Specify the network protocol for each network board. How can...
Summary: I have a situation where I need to associate a secondary IP address on 1 nic to a specific local ip address on a different nic, both on the same serve...
Summary: I have had a similar problem - there are a few things to look out for: 1) Groupwise 5.5 (WITHOUT the newest service packs) has a problem where it all...
Summary: Hi, I have a simple question for all of you savvy Novell users. How can I access and view the subdirectories on the cd-rom with Novell 4.11 Server. I ...
Summary: Try getting a LAN scanner. See what IP's are in use. Furthermore, through NWADMN32 (on novell 4.X and up) you can see the IP addresses used by the cli...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
