Summary: I am currently running 2 HD's. 120GB for all my programmes, and 40GB for storage. I want to upgrade to 2x250GB. I really don't want to format and rein...
Summary: Davincaps. thanks for that link, a great source of info. Wonder why when a search is done on the Seagate site they do not include the ftp site in thei...
Summary: But if you do put on the HD's as primaries and CD's as slaves, I heard somewhere that since the CD's at most run at ATA33, the drives will also run at...
Summary: I have been running with one master HD and one slave HD for a while now. The master is connected via Serial ATA and the slave is connected via IDE cab...
Summary: Hi..Have 2 20Gb HD's..used Ghost last night to clone Drive C to Drive D..now-how can i get into Drive D to run it?..is there a software program i can ...
Summary: I've a general question that I've not come upon in XP yet (but am planning to encounter it) I intend to place a second (fresh/unformatted) hard drive ...
Summary: Trios make a device (I have one) that allows three HDD to boot from. You plug all three HD's in and set them to master. You then plug the one IDE ...
Summary: Putting 2 optical and 2 SATA HD's on an ABIT IC7-G Max II Motherboard. Has 2 IDE channels that can run 2 drives each, and 4 SATA channels. BIOS is AWA...
Summary: I have an old gateway. It has a dvd burner, dvdrom drive, floppy drive, tv tuner pci card. I'm going to add a pci to USB 2.0 card soon. I don't hav...
Summary: Setup: MoBo: ASUS P4B533-E (with RAID) OS: Win2000 2 HD's connected to the primary IDE channel 1 DVD-player connected to secondary IDE (Master) 1 DVD-...
Summary: I am about to have someone install two interal drives on my system. My 250GB will be the master and a 120GB will be the slave. I will use the 120 fo...
Summary: Yes, power cables are connected, hard drives are spinning up. IDE Controllers - ? I checked Bios, ide drives set to auto. Using 1 ide channel, other h...
Summary: Hey. Nasty problem. I recently took a Maxtor 60GB HD out of one machine and put it in as the primary slave in another. Now when I boot the BIOS detect...
Summary: If I understand correctly, the problem is with IDE2 only, right? First thing I would check is the cable connector for IDE2 on the motherboard. Make ...
Summary: I recently ran into some problems with my HDs. Although the OS still boots ok, it only detects the hardrive it's installed on. The two HD's are both ...
Summary: Hey guys, I'm having a problem with my system. I bought a seagate external 200 GB hard drive back in the summer and whenever i attempt to transfer fil...
Summary: I have a Presario 5441. Although I can get into the BIOS via F10, I don't see anyway in the BIOS ot change the HD type(i.e auto detect, etc..) Does an...
Summary: You can move an OS drive from one machine to another without reinstalling the OS. You can also change motherboards on a machine without reinstalling t...
Summary: To answer your 1) You could do that and automatically get a dual boot out of it, but XP will not see the logical partition it is installed on as C: ...
Summary: Your new DVD burner is also cd burner I suspect, so in the long term you might be better of having the DVD burner and DVD rom as the DVD rom can spin...
Summary: Hey all-- I'm wondering if I have enough power to run a second HD on my current 350W power supply. It's an Antec case, so that rating should be fairly...
Summary: Well, the thing is: I have 2 hd's in my pc, one with the OS (XP PRO) and the other one is the slave, just for files. The problem is that the hd with t...
Summary: Without even managing to fix my last issues with my graphics card, I encounter a new but maybe related issue with my hard drives. To prevent possible ...
Summary: Unfortunately, it turned out his board is an early version & only has 512k L2...which means 64mb is the cache limit. I tried all sorts of combinations...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
