Summary: So I was mistaken there is no slave for Primamry IDE (the floppy is not on that). The PCI SCSI is in 0 position. I disabled serial ports A and B in t...
Summary: I am having problems with crashes which seem to be video related. I have installed 4 diff. driver versions with no luck. Had the same problem with m...
Summary: I have set my BIOS perfectly and can check IRQ's for correct setting during boot up - but once W2K gets involved it reassigns all of my devices to one...
Summary: Ok, I have been looking for about 2 hours online on how to change a freakin IRQ in win2k but have coome up with the conclusion that I cant. Is this so...
Summary: I have 6 devices video card,network card,sound card, raid controller,and 2-usb controllers on irq 11 on my desktop running w2k. computer pauses and sl...
Summary: my 56k modem (isa) isn't working. i'm running win2000 server. before i install it com port 1 is set to irq 4, com port 2 is set to irq3. when i inst...
Summary: This is normal with Windows 2000, the sound card should work if it is 2000 compatable. One thing you can do to not have so many devices on one IRQ is...
Summary: U may want to go to system BIOS and look for ISA/PCI legacy devices Interrupts. Normally list is like: PCI/ISA device 0 IRQ: (Any free IRQ or lesser c...
Summary: I too have problems with IRQ 11. My system is trying to use IRQ 11 for my sound card, graphics card, networking card, modem and for 2 USB ports. I've...
Summary: Just a thought to all you out there having trouble with irq's and the like, i have had loads of trouble with 2K and my setup so here's a bit of help f...
Summary: I just got w2k a few days ago and am still getting used to it so bare with me if this is more of a newbie question. Was having a bit of trouble with m...
Summary: Hello out there: I have just setup my computer and have not run it with DV Storm and Premiere 6.0, but it is smoking when I do the DV Storm Test from...
Summary: I have just installed win 2k and have my videocard,sound card,raid controller,network card, via usb controller on 1rq 11. win2k will not let me change...
Summary: I have the same problem with the irq's!!! I have: Asus A7V T-bird 900 128mb sd-133ram (amd compatible) 17.9 Western Digital HD SB LIVE! Geforce 2 GTS ...
Summary: How do I re-assign IRQ's for devices in Win2k The "use automatic configuration" box is checked and greyed out as is the "change settings" button. Anyo...
Summary: The option to change IRQ's IS in the device manager screen. You find the device causing problems and click to find its properties. The end tab shows...
Summary: Hello out there: I have just setup my computer and have not run it with DV Storm and Premiere 6.0, but it is smoking when I do the DV Storm Test from...
Summary: How do I rearrange IRQ's ? I have both my NIC's and my videocard sharing IRQ11 but IRQ 2,3,7 is available so I want of course move them so they do not...
Summary: I assume you are talking about the Profile folder. I also assume you are trying to transfer eveything that was in this profile folder to the new user'...
Summary: I need to transfer data ( 3MB/s) to a board connected to the PCI bus without DMA. I can reach this rate but the interrupts of mouse and keyboard break...
Summary: Hi All. Just got done installing W2K Pro on a old ABIT BH6 440BX Motherboard & Celeron 300A>OCed>450Mhz & 512MB of RAM. Well I was looking in the Syst...
Summary: Was wondering how i can change the irq's of one of my networkingcards, they both work on irq 09 which makes my i-net connection crash after a while ev...
Summary: I have 2 server A wnt 4.0 2 nic 90.0.0.1 submask 255.255.255.0 gateway 90.0.1.1 and 90.0.1.1 submask 255.255.255.0 gateway 90.0.0.1 B w2k 3 nic 90...
Summary: One computer must have 2 NICs and 2 IP addresses. I have this setup at my house & I use 192.168.0.1 & 192.168.0.2 local IP addresses. The one PC wit...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
