Summary: PC2100 DDR ram (512) & (256) Motherboard PC Chips M811 v3.1 Athlon XP 1800+ The latest BIOS updates only the Lan and Sound drives so i doubt that woul...
Summary: I have the same problem, but the max i can set the fsb to is 115mhz, i don't know why. Whe i change it in the bios the computer won't boot up n i have...
Summary: Hi I have a KT7-RAID with an Athlon XP 1700+ and 1Gb PC133 SDRAM...but I can't set the FSB to more than 103Mhz, so I can't run the Athlon at even its ...
Summary: Hi. I have overclocked the above prcessor to 989.89 Mhz and the system has run stable for about 2.5 days. So I decided to test the limits of the pro...
Summary: So I was looking through my BIOS settings because I was told overclocking my FSB might help improve my gaming performance. But when I looked in Advanc...
Summary: These people at anandtech.com seem to be doing it just fine- http://anandtech.com/guides/showdoc.html?i=1440&p=8 the article begins at- http://anan...
Summary: if you don't see a pci divider in bios then your board calculates it automatically, making it 1/4 for an fsb from 133 to 165, and 1/5 for over 166. T...
Summary: Hi, I've got a MSI KT3 Ultra2 mobo, and a 2000+ for proc. I dunno what happened but when I last turned on my PC it wouldn't boot up -didn't even send ...
Summary: For some reason, I can't get past 112mhz FSB when I try to overclock from my stock 100mhz. I have a P4 1.8ghz Williamette and an ASUS P4T. Once I try ...
Summary: Unless I was uninformed by AMD about fsb speeds, I can't seem to get my XP1800 to operate at the deafault 133MHz FSB....you don't have to pull any jum...
Summary: I'm afraid to do anything with multipliers or increases in FSB because of my temperature problem (which I am researching right now) I've read all over...
Summary: I can't oc my 2600+ either with the fsb our with the multiplier.When I did it my frecuency fell back to +/-900Mhz. (it's on a A7N8X Deluxe) ...
Summary: I have ordered the following: MOBO-Asus A7N8X(can run at 333 FSB) CPU-XP2400(266) RAM-DDR PC3200(400mhz)512MB CAS 2.5 I have begun to wonder, should I...
Summary: My MB is just the 9PJL Apogee. There are other boards (9PJL2,9PJL3 etc.) I have used the windows Apogee software to increase the FSB sucsessfully bu...
Summary: Shuttle an35n-ultra 512 GEIL PC-3200 nforce 2 chipset I,m running at 190 but I can't get to 200. no voltage changes yet. I oc a ecs l7s7a2 board so i...
Summary: Hi, Thanks for the help guy's hey i wasnt getting angry it's just that i was getting a bit frustrated, anyway's i've looked in the bios for an fsb and...
Summary: Use default settings to begin with...don't start tweaking everything at once. If you mess with the RAM timing & the CPU at the same time, you won't kn...
Summary: yeah...i recently o/ced my processor after getting some help from 666. my fsb is now set at 146 and my comp stats are: 1.4 t-bird 266fsb, pc chips 817...
Summary: hi.i have a big problem.. today i tried to overclock my new cpu 2.4c on bios setup ..and i made the fsb to about 240 and then i saved and restart but ...
Summary: Sorry, I read too quickly...I see you have the manual. I doubt the CPU speed is your problem, my guess is that you're using the crappy onboard video. ...
Summary: I have a Duron 1100 running stable at 1403 (FSB: 133 x 10.5) - WCPUID reading - at 1.85v on an Abit NF7 mobo. I've managed to have it running 1463, bu...
Summary: I just bought a new Shuttle PC and an AMD XP2600+ I know these two are supposed to work together but I can't get the CPU to run at the right speed. Wh...
Summary: I have the same problem as posted above. A bit let down by Tomshardware to give GA-7VRXP motherboard editor's choice. I got this motherboard yesterda...
Summary: Hello, I tried searching and cannot find the drivers needed to get any sound for when I am playing games now. I installed a Geforce2 MX400 64MB video...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
