Summary: Does anyone have any clue as to why I can access my cable modem which is located in my basement via inwall Cat5 wiring (through to the internet) from ...
Summary: Hey Matt- Are you still loosing connection to the internet with the linksys? I was having a similar problem and may have found a solution last night....
Summary: Hey guys- I'm having a very similar problem with my new linksys router dropping my internet connection and I think I finally found a solution! Here's...
Summary: Hi, I am facing problem networking my 3 devices in the way I want. Here is my setup. 1) Sbg900 Cable modem. 2) Linksys router WRT54g2 3) Vonage voip a...
Summary: I have 2 cable modems and 2 routers. I need some pointers on getting the 2 routers linked. Wan ports are used from the modems on each router. The rout...
Summary: You don't really need to use the CD that came with the router. I believe it is just wizards for the configuration of the router. I believe it is eas...
Summary: Hi, I have a SpeedStream 5200 DSL modem for broadband internet. I used to have cable modem service but i switched to DSL to try it out. Anyway, I ca...
Summary: I need to know if there is a way to log into my linksys cable modem like a router. I know its really sad, but i have had dial up all my life up until ...
Summary: You'll want one of the new brodband routers available. I use the 4-port switch/router from Linksys. I absolutely love the thing, it supports NAT, bui...
Summary: Just set up a linksys wrt54g 1 pc wireless 1 pc connected via ethernet and a solaris box connected via ethernet. Had many issues pinging at first. 1)...
Summary: I currently have a Cisco 804 ISDN Router than my company provided me to use within its firewall. I am interested in signing up for my local Cable Co's...
Summary: Hi everyone got a problem that is giving me repeated headaches. Hope someone can help. Problem: Cable modem 1 attached to linksys router. Workstation ...
Summary: I suggest one of two options: 1) Purchase a LinkSys router (BEFSR11) and use it to connect between your hub and the cable modem. The LinkSys will the...
Summary: I would recommend buying a Linksys 4 port router Model # befsr41 instead of a hub. You connect all pcs to this router and then connect the cable mode...
Summary: I tried all those sites already, they suck. I need specific info on the 3COM TMX Cable modem (1-way) and sharing it throughout my home network set up ...
Summary: I have been using the same Linksys Router for going on 5 years. I have recently been having alot of problems loosing connection so I decided it was ti...
Summary: Heres the situation. I am renting an apartment in someones home. They have provided me with an ethernet cable from their router(not wireless) but the ...
Summary: My roommate and I share a cable connection(2000/385) with 2 IP addresses. At this time we are using a hub to connect the 2 computers to the SB4000 ca...
Summary: Yea The router should automatically spit out the ip address .Although I think it is to assign them assign them yourself. You may want to go into rou...
Summary: Hi Nick, I'd first try to isolate the cause: Connect the PC directly to the cable modem without the router. If the connection keeps dropping every o...
Summary: I have never heard of a wireless cable modem. There are however many wireless routers and there may be a few wireless routers that have a "built-in" c...
Summary: Is there a link between all of the machines and the router and the cable modem and the router. It should be plug and go, also what model number of ro...
Summary: Dear all; I use cable modem and linksys router to share the internet connection with two PCs. The router is set as defult (DHCP), one pc is running wi...
Summary: You can't use a hub and one cable modem to log on twice so what they're proposing is sending/renting you another cable modem or a router for the other...
Summary: Thanks Chas. Yes you are right. I do have different machine names. And All my machines have the same settings in Newtwork neighborhood. except in th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
