Summary: I'm not familiar with pcpitstop so I can't answer that question. You didn't actually name your CPU but I'm guessing it's an Athon XP 1900+. It should ...
Summary: thank you sterling! That would make sense... just wondering, should I change both the ram and cpu speed to 133 or just one of them? (the setting goes...
Summary: Your running the same chip set as me. I've got the MSI KT400 Ultra. What you need is to download the correct BIOS as the old one kept overclocking/dec...
Summary: "replaced the 2.1ghz AMD Athlon (clock speed showed 160) with a 1.8ghz AMD Sempron (clock spped shows 200)" You need to clarify which CPUs you're talk...
Summary: Hi, I just upgraded my CPU to an AMD Athlon XP 3000+ (333 mhz FSB) and am having some trouble. First of all, here is a link to my cpu z report: http:/...
Summary: When I boot my pc it states that my clock speed is 1250MHZ. If I adjust the FSB and then reboot it correctly identifies the cpu as an Athlon 2000XP b...
Summary: Hi there! i have a little question. I own a Celeron 400mhz. I have found in BIOS that the CPU clock speed is at 233mhz... what's this about? Can i inc...
Summary: Hi, I have a quick question. My ASUS A7V333 motherboard has a set of switches with which you can define bus speed according to the CPU that you are us...
Summary: Hi, going to start building my new computer soon, and I'm confused about setting the clock speed, the frequency, the CPU I can figure out, but what sh...
Summary: I am in desperate need of some help. just built a new computer using the Gigabyte GA K8NXP9 motherboard but the clock speed of the CPU is only being d...
Summary: I have an older AT computer with an Elpina BA E-VO motherboard that my daughter wants to use for School. It had an Intel MMX 233MHz CPU in it, but I p...
Summary: You need to set your CPU clock speed to 133MHz for the 12X multiplier on the CPU to give you 1600MHz. You did not give your MOBO. Mine has a jumper a...
Summary: is the standard clock speed of the AMD 64 3000+ about 1.81 Ghz? This is what mine is showing up at, is my FSB wrong? If so, how do i change it, i cann...
Summary: Hi people!, i have an intel P4 1.7 Ghz microprocessor and i want to know which is the best clock speed to set it up, when i got to the CMOS table it w...
Summary: My PC keeps restarting and freezing and even provides no screen at times. If I leave it long enough and come back I can boot up to Win XP but can't ge...
Summary: CPU Bus clock is the speed yout motherboard runs at. ATA100 is the speed of the harddrive. It goes at a maximum of 100 MB/sec( at least theoreticall...
Summary: I hope you can clear this up, its a really stupid question and something I really should know having used computers for years, but don't. I'm building...
Summary: I'm helping a friend fix his system, and I need some help here. His mobo died. He has an Athlon 1 Ghz T-Bird CPU. I've picked up (from a reputable com...
Summary: uh, yea...2200+ runs at 1.8GHz, but how do you make it run at 1.67GHz without changing both the FSB & the multiplier too? The only other possibility i...
Summary: Hi I have a Athlon 2400+ and when i run Amd's cpuinfo it gives its clock speed @ 1341 and Amd's cpuid gives it @ 1327. Sometimes it goes up to 1500+ ...
Summary: Greetings all, I'm building a new computer and I'm just wondering whether it is better to have a slightly higher clock speed on a dual core CPU, or a ...
Summary: I have a Tyan Thunder K7 S2462UNG motherboard with two(2) Athlon MP 1200 mhz processors installed. I am running Win2K SP2. I recently ran the Belarc A...
Summary: I cannot get this processor to run at the proper clock speed it is a 2000 xp from amd if I bumb up the fsb past 110 it siezes the comp and runs at the...
Summary: AMD, the Athlon Xp runs at 1530 MHZ, Before setting this Clock Speed, Clear the CMOS by removing the Jumper and CMOS Battery in the Motherboard, with...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
