Summary: Hello everyone! Okay, I want to use GarageBand. I meet all the specs except the 600MHz CPU. I can't find a CPU upgrade on eBay, does this mean there ...
Summary: I don't know much about Macintosh but I'm pondering on buying a used PowerMac G3. I know that a lot of them don't come with much (233-300Mhz) process...
Summary: I just recently bought a powermac beige g3 266mhz processor with 96mb ram. I was just wondering how much upgrading can be done with it and a possible...
Summary: I recently aquired a old Beige Mac G3 for really cheap $! The poor old 6 gig hard drive is dead tho the computer does at least have a screen open with...
Summary: Where can I find a cheap cpu upgrade, looking for speeds around 800mhz to 1.0ghz. Either new or used. ebay doesn't have many choices, any sites you kn...
Summary: I was wondering, so i decided to ask. I know about 98 percent of the questions asked here are for PPC, G3, G4 Blah Blah Blah machines, but i also know...
Summary: Hi, What is an acceptable CPU temperature for the G3 processor? My iMac ranges from 27C when cold, to 55C when being used intensivly. I installed a n...
Summary: I have been looking for some time to find a cd/rw drive for my mac which is 250mHz BUT is pre G3. All seem to have a system requirement for a G3 pr...
Summary: I have been looking around at the Sonnet or Crescendo processor upgrade for an old Powerbase 180 Mac. Do these processor upgrades cause any proble...
Summary: There are no processor upgrades for the PowerMac G5. Your best option for increasing speed is buying more memory. I think the G5 can take 16GB maximum...
Summary: Not too long ago I had purchased OSX for my Power PC G3 Beige. It seemed to run o.k., but when I upgraded my hard drive to 40 Gigs. OSX was not abl...
Summary: i have an g3 ibook 800MHz i want to know what the fastest g3 i can upgrade to or can i go g4 (i have an apple store nearby that could do the upgrade...
Summary: i am going to upgrade my mac and need to know of where i should start. here are my current specs: Power Macintosh 5400/180 180 Mhz cpu 603ev 48 MB ...
Summary: Anyone have any ideas where I might be able to find/obtain a PPC processor to upgrade my 867MHz machine to 1 GHz (this is the faster speed processor t...
Summary: You can get one up to 1MB, but if you get a G3 card, it will be completely ignored. Then again, the 7200 has to be one of the WORST machines to upgra...
Summary: Try the link below http://www.xlr8.com/products/xlr8_products/ps_mspeed_G4_zif.html There are good options for your G3 to step up to a G4 processor. ...
Summary: I'm looking for a good quality photo-capable printer for my original Powerbook G3. It has no USB or Firewire so I can't use a lot of the newer pri...
Summary: I'm trying to build my own right now, email me to see my progress.. I got a G4 gigabit Ethernet Logic board from Macresq for 199.99(cheap for mac par...
Summary: Don't do it. $160 will buy you a far better Mac that you can put a less-proprietary upgrade in *and* a G3 upgrade for that Mac. The 7200s aren't wor...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
