Summary: K63, Via MB chipset...165w power supply, 128 ram, Win98. Compaq custom deal. Got it in 98. 9m ago started with an occasional 'no start' (my term). ...
Summary: Hi, i write you for a problem that i've met with Asus P5B motherboard. First, i apologies for my english level and my grammar error. This is the probl...
Summary: I have had constant problems with my 663AS Ultra mobo (w/ Athlon 1.4ghz) for almost 2 years. Every time I fix it it will work for a while and start ac...
Summary: If absolutely nothing happens when you try to turn it on(no fans or sounds) then either the motherboard is dead or the cpu is fried. If the cpu and m...
Summary: I had a soltek sl-75frv motherboard and i just bought a retail athlon xp 2700+.The system never started or did any sound so i assumed it had to do wit...
Summary: This is my problem. My friend came over to use my athlon xp 1700+ oem cpu to test out in his new system, he didn't have his cpu yet. I left the room a...
Summary: The problem is easily remedied... Go intel, sure AMD is cheaper, but who wants to sacrifice reliability for a few dollars? Don't listen to the AMD bo...
Summary: Hello Now this time, I think I seriously messed something up this time. I just bought an Athlon XP 1700 system (with a chaintech ct-7aja2) motherboar...
Summary: ok when i turn on the computer the green and yellow led light up in the front, telling me theres a problem. I have the case open so i can see what g...
Summary: Having a very similiar problem and wanted to see what you guys thought. I got my A7V up and running, but kept having power problems. Shut down or woul...
Summary: The CPU clock ratio is the CPU's multiplier. It is fixed for a P4 and cannot be changed. You sure only set the Vcore higher if the system starts getti...
Summary: 110 FSB should be fine...you could possibly go higher. Go a little at a time though...don't make a big jump or you'll end up having to clear CMOS & st...
Summary: 1. You can't modify the PCI speed - that was my point. When you increase the FSB, the CPU speed will increase along with it. 2. Try it at 2.8v 1st - i...
Summary: After I unplugged and then plugged back my IDE cables, my pc doesn't boot. At all. I mean black screen, no bios screen at all. When i turn it on, i ca...
Summary: No, you obviously DON'T know what you're doing! All you need to do is raise the FSB in increments of 5MHz, then reboot & test your system after each c...
Summary: I must say this is a great forum with alot of knowlegable people. I am stoked! Well there is no physical damage I can see with the naked eye. Maybe...
Summary: 250W should be fine, provided it's a decent PSU. It's not like you're building a powerhouse system. The MS21 is a crappy SiS based board & the Duron i...
Summary: If your chip was defective it wouldn't work at all. Although, the prescott does run hot, it's not that hot! I recommend a bios update, this sometimes...
Summary: OK. Coupla problems. Award BIOS (Dunno which one cos I can't get into my machine). Runs POST test, I get 2 high beeps (like the single one when everyt...
Summary: Okay, I have a bit of a problem and am just a few paces from jumping out the window... my comp is always causing problems but this one seems to be t...
Summary: Hello, I have ABIT KT7A mainboard with 1GHz AMD Athlon processor. On the startup, the computer says it's 750MHz and displays a message "CPU checksum e...
Summary: I am trying to sort out a friends computer. It won't start - at all. No beeping, no bios screen, nothing except p/s fan and cpu fan. I have removed ev...
Summary: "Would I have to reduce the clock speed of my RAM?" Your RAM speed with SDRAM is the same as your FSB. Your RAM should be running at 100MHz right now...
Summary: Trust me the CPU is ok. I've had two burnt Athlons and the system just wouldn't start at all (it sat there bleeping uselessly). Once I had a CPU i tho...
Summary: I still can't get it to unlock. I've tried using a mechanical pencil with 2B lead but that didn't help. And since I'm despret to unlock it I soldered ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
