Summary: I have a Gateway with 600MHz Athlon, and AMI Kadoka motherboard. I just upgraded the BIOS from 0AASNP01 to 0AASNP06, and now when I try to boot it gi...
Summary: I have an old computer that hasn't been used for over a year. At first I couldn't get anything to display on the screen. I fixed that, but now on boot...
Summary: Hi, There is a yellow explanation mark in my Device Manager next to a Hard disk controller (Intel PIIX PCI IDE Controller (Bus Mastering not supported...
Summary: Hi all, I am having major problems trying to get my friends computer working properly. have reinstalled windows and most things work well, except for ...
Summary: I'm new to computers. I would like instructions on what keys/commands to press/enter during bootup in order to view my BIOS & CMOS settings. And also,...
Summary: I ordered a new motherboard a few weeks ago. ECS K7S5A and a processor AMD Duron 850. I recieved the order and put my computer together. Everytime I t...
Summary: I originally tried to load XP onto my machine, but it failed and I ended up with a partial instal. This then gave me an annoying screen during startup...
Summary: Phew, thanks for the comeback... I reseated cpu, unhooked ribbon cables and power from floppy and dvd drives, took out the modem card and unplugged th...
Summary: CMOS is a battery powered chip and is used to keep you hard codes system settings. BIOS is where you adjust Basic Input/Output Settings such as Serial...
Summary: On a post this forum on Dec. 25,2001 11:58:58, Harvey wanted to know how to save his CMOS settings. I don't know how to SAVE them, but you should prin...
Summary: Hi, my parents have a Pack Mate 7130 with 16mbs ram....I had to borrow the ram for another computer so i took it out used it for a bit put it back in ...
Summary: Just a comment. I have the same mainboard (ASUS CUSL2), 2HDDs on primary IDE chanel. I ran WinME before; the second HDD went corrupted; I then set it ...
Summary: Every now and then computor sets up defaults returnin LPT1 to address 7. I need it to set up at 5, LPT2 is set up at ten and audio card must set up at...
Summary: I have bought a new motherboard and processor. The motherboard is an ESC K7S5A and the processor a Socket A AMD Duron 850mhz. When I turn on the compu...
Summary: Right.. here we go. I installed a new sweex wireless ethernet connector, and that's more or less when the troubles began. Symptoms: inexplicable syste...
Summary: Hi. I was wondering if anyone here could tell me how to change the settings in ez-BIOS. I'm having a hell of a time with a new external CD-RW drive, a...
Summary: i recently rebooted on a different system and after the memory test and auto detect of hardware it said cmos settings wrong cmos memory size wrong w...
Summary: Hey, Go to Standard CMOS settings in your BIOS and configure the Type and Mode settings for all drives to Auto this will find your CD-ROM after you Sa...
Summary: so when I reset my CMOS settings and everything is up ans running again, going back to my original problem, which was AFTER I had reformatted the driv...
Summary: hi, this is a reply to the people that messaged me with help at this page http://computing.net/windows95/wwwboard/6.html under the subject name, wind...
Summary: Pip, There are 2 ways to stop the Num Lock feature from comimg on. First, as Ken has suggested, is through your BIOS settings. As your system boots ...
Summary: hello, i plead the utmost ignorance in terms of computers. I am a poor uni student who has somehow f***ed his computer and any help would be greatly a...
Summary: Upon starting my computer today I had that "CMOS settings wrong" notice that prevented me from entering Windows. I did the F1, F10, hit ok and made it...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
