Summary: i have a M810 series motherboard which is a T-bird and AMD duron 800. recently im having a problem, whenever i boot up, no display on the screen,then ...
Summary: I have a Soyo Dragon Lite M/B and XP 2000, I got the CMOS checksum error evrytime I try to set the CPU clock different than 1250 Mhz. I have flashed t...
Summary: fragger299, your problem is not similar to Hobdoc's problem. Your problem is the famous "Lost CMOS" problem for the k7s5a. there is no known defina...
Summary: Have an ancient 486 motherboard & am experiencing major problems during upgrade to a Cyrix 486dx2-66 from Intel 486SX-25 Thought it would be simple en...
Summary: Well the fact is when i start up my computer when it goes to the BIOS booting screen,it says CMOS/GPNV checksum bad and it wont let me any usb ports a...
Summary: I seem to have a problem with a DURON 700mhz in a JETWAY 663AS PRO motherboard. I tried my friends Duron processor and the computer works fine. But wh...
Summary: Having a major problem with this set up. AMD 2600XP Asus a7m8x-x (bios rev 1005) 512mb ddr 400mhz The system seems top power on, keyboard lights flash...
Summary: Hi there! I recently had the problem, that my cmos settings were lost. When I changed the settings again, everything was ok for a while. After two wee...
Summary: you wanna talk about fradulent vendors? Here in Regina Canada, we got a place called Techtronics. My buddy bought a built system some time ago that wa...
Summary: i just built a new PC, after i set up my new PC and the 1st time to turn it on, all the fans are running strong, everything seems on, just nothing app...
Summary: i ve bought an original boxed AMD Athlon 2000+ with PC2700 DDR SDRAM and Abit NF7-S mobo. Im with the following problem: every time i press the power...
Summary: I had this problem, whenever i turn on my pc, i can sense that the system is actually running but nothing can be seen on the screen. I have to reset t...
Summary: All the above info up top is good for trouble shooting but leaves one or two out. If the Video card is bad the video bios will not boot and therefore ...
Summary: Attempted to build my first system. Ordered case with 300 watt PS, DVD drive, floppy etc.. Initially ordered a biostar m7VKQ mother board and AMD XP...
Summary: I just recently built my 933 p3 up.It consists of a Iwill VX133 mobo and the p3 chip.Upon setting everything up i booted and went into the bios checke...
Summary: Thanks guys for your replies, That's right after it crashed and failed to boot, I partitioned, reformatted then reinstalled xp, that's when the cpu sp...
Summary: "...i call a friend he told me to unplog and stuff and the other thing he told me is to take out the CMOS battery..." Sounds like you called the wrong...
Summary: yea, i reset the cmos, not sure how i flash the bios, not sure if thats the same thing.. i'll try that next though, /me reads a dozen tutorials... i...
Summary: Ummm you're probably barking up the wrong tree by thinking it's a power supply problem. 350W should handle that setup no problem regardless of your v...
Summary: I don't think I've ever ran into a problem this utterly frustrating to the point where I just want to give up, and go hide in a corner. AOpens, phone ...
Summary: It was a normal day while idling the net, I decided to turned off my system, then I watched TV, and turned it on again. but then... my system didn't p...
Summary: Hi. Whenever I try to turn my computer on it goes straight into the CMOS setup screen. I've not enough knowledge about this to know what to do, so ca...
Summary: I have an Athlon 2100 xp that has recently started registering as an Athlon 1500 xp. The problem is clearly due to my FSB, which has reset to the defa...
Summary: I'm in the process of building a computer but i've ran into a few problems. I have a ECS K7S5A motherboard with a 1.4ghz Athlon processor and 256mb o...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
