Summary: I need to access my Freecom CD-RW player using Dos (7.11) Does anyone know a program or a driver that will allow file transfer under DOS ? Thanks in a...
Summary: I would like to operate the CD-RW drive under DOS or Win3.1. Where I can get the driver and software? This is an industrial 486/IDE/ISA computer which...
Summary: In general, are CD RW drivers available for DOS? Would there be any suggested drives to purchase for this purpose? I have heard that you can read bu...
Summary: Hello, I search the line of command in CONFIG.SYS and AUTOEXEC.BAT do fonction on cd rom HP 4X IDE READER under DOS 6,2. HELP ME PLEASE. ANSWER SIMPLE...
Summary: I'm trying to restore an older Toshiba 650CDT Portege laptop with WIN98 after a disk crash. The problem is I have no CD for the laptop, but I do have...
Summary: For support CD-ROM under DOS, you need insert some lines in CONFIG.SYS and AUTOEXEC.BAT --- CONFIG.SYS --- DEVICE=C:\WINDOWS\COMMAND\OAKCDROM.SYS /D:...
Summary: ok tnx guys for help now it detects me the cd rom:p but the problem is now that the cd rom says: u must entry a device in your config.sys like device=...
Summary: I got a Lite-on USB CD/RW Booting from a DOS disquette in order to run ghost, I used the driver USBASPI.sys and it see my cdrom: ASPI for UHCI/OHCI US...
Summary: Hello i am using a madge token ring smart 16/4 PC card in my Laptop and i am having a hard time on putting an Operation system on it becayse it has no...
Summary: I found the correct CM206 driver for my CDRom and installed it (I think it is the correct one CM206.exe). The installation went good and the installa...
Summary: Hi JapoFran, About "SBPCI128 under DOS" of August 1st: JF> I installed DOS 6.2 in a new FAT16 partition. When i put `Jazz JackRabbit' on CD for use wi...
Summary: I'm currently crunching on a related problem and I notice this topic fairly recent, so I'll put my 2 cents in: (I have a Creative 6x CD-ROM drive, and...
Summary: No, Doomsday, not trying to be anything--I'm not an expert, although I did manage t o get a CDRW going in W9x. Seems like I saw a few posts asking ab...
Summary: I found the correct CM206 driver for my CDRom and installed it (I think it is the correct one CM206.exe). The installation went good and the installa...
Summary: I do not believe so. DOS for the most part uses the I/O card itself to determine its COM port, its IRQ and it's I/O address. So that being said it's ...
Summary: Hello. I've been trying to run a game in DOS mode, but every time I restart in DOS mode, I get this error: "Device Driver not found: 'mscd001' No Va...
Summary: Could someone tell me the steps I'd need to take and the files I'd need to initiate a CD-ROM in DOS using only a boot disk? My laptop has crashed and ...
Summary: Hi I would like to have a tcp ip interface under DOS 3.2 to be able to share files and to run telnet with an BNC ethernet connection Thanx NB)Please s...
Summary: Hello, since some weeks before I used Windows95 on my machine and Sound worked great under DOS. Then I had to update to Windows98 SE to get support fo...
Summary: I'm trying to install a cdrom in an old 486 system under dos 6.22. I've got drivers from the CDrom God utility, and have run mscdex. Changing to the d...
Summary: Hello, does anybody have an idea, how can i use both parallel and atapi cd-rom under DOS? I use etapcd.sys and oakcdrom.sys drivers, only the parallel...
Summary: I went to www.bootdisk.com and while I liked the site and they were of help in accessing a cd-rom I couldn't find any help in burning a cd with a cd-r...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
