Summary: When I run a probe-scsi from the prom monitor, I always receive an infinitely repeating reply of bus fault. Can anyone tell me what this means, or...
Summary: What does the error bus fault mean? I have a sun netra t1 box. I am trying to install an expansion pci scsi host adapter but i Have a problem. Without...
Summary: Hello, I have a Sun Ultra 5. I am posting because I am trying to install Debian Linux on it and it does not seem to want to boot from cdrom. When I t...
Summary: Hello I have received my new V240 from sun with cd rom, 4 disks 2 gig ram and 1 Usparc III processor, I see when I do a probe-scsi command at the OBP ...
Summary: Ji, Tried "scsi test" and unfortunately I get a "Bus Fault".... doesn't sound too good. It kept displaying it until reboot. In relattion to STOP+N, I ...
Summary: hi! I am using Sun Sparc Ultra-1 machine with Solaris 5.6 system. I want to find out the present bus width of the processor. Is there any unix command...
Summary: I have encountered one error when run my program in Solaris. "Bus Error" Who can tell me under which circumstances does this message means? Thanks ...
Summary: Hi, Recently I have not been able to print. lpstat -t tells me the printer is enabled and accepting jobs but the /etc/lp/logs/scheduler log says this ...
Summary: Hi, I´m having a odd problem, when trying to get a 3COM 3C905c-TM NIC (PCI) to run in Solaris 8 on a intel-machine using the recommended drivers from ...
Summary: Hi, I downloaded the openssh from www.sunfreeware.com/ I've installed zlib, egd, openssl, prngd, tcp-wrappers. When i tried to do a sshkeygen, or run ...
Summary: Hello, Im installing Solaris 2.5.1 to a Pentium Pro box thats sittin around.. I made the boot disks and it boots but after a little while I get an er...
Summary: Below is the general system configuration of our sun application server.... Our system crashed the other day and it shows "PROM detected failure" mess...
Summary: I used SE7500CW2 mainboard for dual Xeons to install Solaris with two SCSI disks, the problem arose when the system starts scanning scsi bus, and fail...
Summary: Hi All, I have a SUNPci Processor card, and I'm having problems installing it. Obviously the first thing I would like to check is if the PCI bus can ...
Summary: My Sun fire v440 keeps on rebooting very often below is the copy of /var/adm/messages please can someone guide. **************************************...
Summary: Hello all, I am trying execute prtdiag command, but the following output is showed: SNESUN586:/export/home/eadm) /usr/platform/sun4u/sbin/prtdiag Sy...
Summary: What is the maximun number of files in Solaris 8 with in a directory? I have a very large number of files and if I use ls command the system makes a s...
Summary: Machine boots normally with webstart CD and all devices are detected by bus numeratin phase. Just after selecting interactive or other option machine ...
Summary: Hi all, after the intel installation of Solaris 8 without problems the system comes up and I get the login frame and can login without problems. After...
Summary: My Sun 5.6 Server reboots every 2-3 days and stops on OK prompt with Panic messages as below, Pl. anybody can suggest how to decode Panic messages to ...
Summary: OK, back from a nice, relaxing vacation, so I suppose it's back to the daily grind now... I've tried Stop-N a couple times, at various times while boo...
Summary: I want to use a Multipack as shared storage between 2 E250 for a cluster solution. Does anyone know if this is possible? I get fault errors on one o...
Summary: cd /usr/platform/sun4u/sbin ./prtdiag gives you processor speed and each ram chip in bank 0 and 1, add them for total ram I have 8 128mb chips=1 gig ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
