Summary: OK, here is the deal. I have d-loaded w2k3 from microsoft, burnt the ISO image to CD-R, Rebooted and used a bootdisk to open My CDROMS and try to ente...
Summary: I Burned an .ISO file with Nero\burn image, and my dvd rom player can't read it. When I try to open the file, it says: insert cd. What can be the prob...
Summary: I know from reading the forums that mixing speed of RAM is possible but can you get away with mixing parity and non-parity. The RAM is going in an old...
Summary: Hi, I'm currently using a Soyo SY-KT400 Ultra (PE), I want to connect 2 hard drives and 4 cd-roms/dvd-roms, what is the best way to do it? ...
Summary: Hi: I plan to add more ran in my computer, and my computer uses rambus(rdram) I want to know what is the different is ecc and non ecc? If my computer ...
Summary: i copied this from the 5starsupport.com form, as I am a tech there, asking an advanced question here. ========================= Subject: wri...
Summary: I have 3 HDs and 1 CD-ROM drive. Two HDs on one IDE cable works fine. The CD-ROM works fine. But I want to add a third HD. I've tried to use the cab...
Summary: Hey, Both the LG 16 x 16 DL DVD Rewriter (GSA-4167B) and the LG 16X Dual Layer DVD Rewriter (GSA-4167F) are on sale at a store nearby for the same pri...
Summary: Im building a new computer and I saw there is ECC and Non-ECC RAM. Right off the bat the Non-ECC ram is cheaper and I was going to buy that but I want...
Summary: No, your files are in the wrong place. They should be in "cds\cdromsi\files\" off of the directory where you installed bcd. Make sure you are follow...
Summary: http://www.linspire.com/btorder Click apply coupon. Type......... Lindows as your code, and then you're done! You'll get access to the Lindows 4.5 ISO...
Summary: hi, yes you should save the file to your desktop. be aware that the file is an ISO image and is about 700MB in size. proceed to download only if you h...
Summary: I'm building a media center PC which consists of all new hardware. I have 3 hdd's with no OS installed on any of them. One of the hdd's is an old 80...
Summary: In My Computer the drive is listed as a CDROM. In Device Manager it is correctly identified as COMPAQ DVD-ROM DRD U-624 One of the data disks was a F...
Summary: first of all thanks for your reply David but that's just what I'm trying to avoid :) Do you mean if I made an image of a CD-ROM to my hd tech-fred? Ye...
Summary: Hi, I have a Toshiba DVD-ROM SD-R1002 drive, which is also a CD-RW! The other day I tried playing an audio CD and the drive wouldnt 'see' it! It was a...
Summary: It is an Corel Draw 11 ISO image. I know that for a fact because I have ISO Buster. I have another question. I downloaded Windows XP 2600 Build and i...
Summary: Hi i have a liteon JLMS XJ-HD 165H. Which reads at 16x. i created an iso of a dvd using DVD Decrypter. For some reason it created the iso in about 2 m...
Summary: If the edges of the break are not frayed and you can carefully fit it back together and maybe hold it together with thin tape on the top, then it migh...
Summary: (I have a dual boot and the following problems occur in both OSes) I bought a new burner (MSI 48x16x48x) recently because my old one died (or I though...
Summary: I have burned the ISO image of w2k3 to CD, But when I go to boot from the ROM(S), I get the error message "CDR103: CDROM not high sierra or ISO-9960 f...
Summary: Ok i currently have a pioneer DVDR-108 burner ive burnt an easy 300-400 DVD5's in it not a problem all work fine recently i have been gettin into DL b...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
