Summary: I bought a new CPU, XP 3200, to replace my XP 1800. I was running an Asus A7N8X Deluxe and I updated the BIOS so it would work with the 400mhz FSB. I ...
Summary: On boot , no beeps, no signal to monitor. Tried monitor on other PC=> OK, ----- Video Card on other PC => OK, ----- Power supply on other PC => OK, --...
Summary: my desktop is suffering from intermeitent, apparent boot failures, usually after I wake it up from being suspended (not hibernation). When I click the...
Summary: Upon a cold boot the system performs the POST and after verifying DMI pool data and checking the boot devices (CD and DVD) the system refuses to boot,...
Summary: hello. yesterday i had the misfortune of having my PC fail to boot up, just gave me the dreaded "Disk boot failure, insert system disk and press Enter...
Summary: Hello. I have a terrible problem, and am unsure what it could be. Here goes: Boot failure. Push power button to start up. Fan goes on. No display ...
Summary: I am in the process of converting my old system (celeron 400) into a practice server for school (Novell Netware 5.1) I upgraded the memory to 512 of r...
Summary: I have a home built. P4 2.6Ghz, 512Ram, Radeon 9600SE. It works just fine as long as I unplug the power cord after each use. If I keep the power cord ...
Summary: I am having major problems with this computer. After switching the computer off, I try to start it up and it goes well up to the part where it has to ...
Summary: Before upgrading I had 512 (2x 256MB) PC2700 RAM. I tried to upgrade it with two more 256s of PC2700. After installing the new modules, my computer wo...
Summary: I had a new hard(WD 7200rpm 8meg cache) drive installed last month,everything was working fine until today. Today I turned my computer on and I got th...
Summary: Booting from the floppy first won't help. The auto detect routine in the bios isn't finding your HDD because it isn't getting up to speed fast enough....
Summary: I just recently got my computer put together. Components include 430psu, xp 2100 cpu, a7v333 mobo, geforce2 video card, ddr ram, and 30 gig hd plus fl...
Summary: Hi everyone. I am having a very strange problem. I have just built myself a new computer, with which i bought a new hitachi sata2 hdd. I installed win...
Summary: I was getting a boot failure for a couple weeks.After running a full Drive diagnostic I decided to change my IDE cables,I suggest you do so also(as th...
Summary: Hallo!My names are Joe Mwangi.I am a 22 year old Kenyan citizen.My PC is quite old (bought in year 2000 with a 40 GB Hard Disk Drive). The BIOS settin...
Summary: I installed a USB 2.0 PCI card in my system and upon bootup got message that cmos battery was low. Replaced battery and now after post system gives er...
Summary: Btw, this is a pentium4 1.9 GHz (the 1st that was sold), with an intel mainboard. I dont have any other hard drive, have 2 dvd's drives. And it is NOT...
Summary: Oright guys I Think ive well and truly fracked my PC up as I can not get it to boot at all. I press the power button and it starts to load but gets to...
Summary: I was given an older PC with win 98. It has a WD300 30.0 GB HDD, System is unable to boot, even with the Win 98 Boot Disk. During the POST it recogniz...
Summary: I had my computer built for a while running without a problem, then my HD broke,(had case open and something hit it, made it skip etc..) Since then I ...
Summary: Hi, i currently built a new pc using the msi motherboard kt3 ultra-aru, but i'm having problems when booting up, firstly it starts a program called MB...
Summary: "If i to build a system now, i will get a dual core CPU" Why?? Explain your reasoning.... "Do you think I will see a (big) difference when going from ...
Summary: The problem is that a 1,4GHz Athlon will be quite a bit hotter than the 600MHz Duron. With the Duron now at 53°C I'm sure the Athlon will be too hot. ...
Summary: I am trying to help a friend fix his "computer". It is a Dell WebPC X500c with a 500 MHz celeron processor and 64 megs or RAM <cough>. The thing wo...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
