Summary: The video card you have shouldn't prevent BeOS from booting. It will boot into black-and-white whithout adding a video driver though. I suspect the p...
Summary: Icons mean this. Atom: Indicates the handoff of the bootloader to the BeOS kernel. I/O Card: PCI initialization has been completed. Lightning Bolt: ...
Summary: When you boot from the floppy and see "Loading..." press the space bar and choose safe mode options. You might have to choose all of them to find out ...
Summary: Well, this is my problem: in my PC there are two video cards, a 3Dfx Voodoo 3 3000 PCI and an ASUS v3800/TVR AGP. In Win98 and WinME they both work to...
Summary: I've got the same problem in Mandrake And Fedora Core 1: After I Insert the BeOS CD And booting from it, I get the BeOS logo, And after the Logo is go...
Summary: Hi guys,I have problem with booting my BeOS. I have tried booting BeOS from harddisk, and from floppy either. On screen appears BeOs boot loader and a...
Summary: I've just installed BeOS 5 PE, I launch it from Windows, the copmuter reboots, the boot screen with icons goes fine, but then after the last icon i ge...
Summary: I have a BeOS problem, i installed beos ( on win2k, ntfs ), when i boot to beos, i get the start screen, it thinks a little bit, the first 2 icons get...
Summary: Hi there, I am new to Be OS. I have installed Be on my PC. It seems to work well but it shows me a graphics card problem. There is only one monocrome ...
Summary: Misel, Are you using BeOS Personal Edition or Professional? Does BeOS boot okay when you boot from the hard disk instead of using a floppy? That is,...
Summary: I have Windows XP Home running on my 900 Celeron, 128 MB RAM, 20 GB HD, 32 MB ATI Radeon Graphics card and I've been trying to get BeOS PE to work on ...
Summary: Well I have 500 somthing mhz and 128 ram,Pentium 3, Intel 82815 Graphic Controller Card,4 partitions with Windows XP, Windows Me, Beos 5 and a Dos. I ...
Summary: I'm having a problem with booting beos. I'm able to install from cd creat a partition and install the os in its own partition. After reboot I get the ...
Summary: Hello... i need somebody to help me...can't get Be to boot... i have a windows 98se on a Toshiba notebook Pentium 233 / 32mb ram / 4gig.. i install Be...
Summary: I have install BeOS 5 PE on a WinXP Pro (Athlon 900) and i can't boot on BeOS(with floppy)error : can't find operating system... I have read that Wind...
Summary: HI all !!! I try to install BeOS for e few days - no luck at all :-(( I made boot disk, I made all partition procedures.When I boot from floppy it fre...
Summary: Ok... I somehow got it... Basically, I looked again on BeTips and followed the directions exactly. I got mkhybrid for BeOS so I could make a floppy bo...
Summary: I love Be, but theres one problem, the video playback on my comp is horrible. The video is smooth, but the colors are all off. My comp is a p3 600 MHZ...
Summary: Hi ! It may be a problem of video card initialization. When Be boots, there's a white rectangle in your screen upper-left corner. Press space then, a...
Summary: I'm having this problem also. I think it is because BeOS reads the BIOS drive partition table and I have a drive overlay that maps my large capacity h...
Summary: I currently use a D-link DFE-550TX ethernet card and whtn I boot BeOS there is no card displayed under Preferences>Network in the white area, although...
Summary: thanks for taking the time to help me out. sorry for being unclear. you're right. when i boot from the floppy i don't see the mscdex message. when i ...
Summary: As of my last post, I have tried the following, and none of it has worked: pressed the space bar during the boot to try out various safe boot options,...
Summary: In the installer it says I should be able to boot BeOS without using a floppy, but it doesn't seem to want to. It loads the BeOS bootup screen but th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
