Summary: Hey everyone! I just discovered the joys of moding and overclocking the family computer. (If I annoy them enought by constantly taking it apart they ...
Summary: I was trying to fix my friends computer, it was not detecting the hard drive after format. I made the biggest blunder of my life by shorting out the f...
Summary: i have a k6-2 AMD 533 with 128mb.by how much can i overclock and not damage my hardware?how do i go about doing it?also i have a PCI Ge-Force2 MX 400 ...
Summary: Hello, if someone could help me with this I would greatly appreciate it. I am trying to overclock this rig with no luck: XP2600+ (333 fsb) Asus a7n8x...
Summary: I hope you get back to this post, I was just surfing through and saw this one. Have you tried a different power supply? I know this sounds way off but...
Summary: My Computer boots up when it wants to it gets stuck sometimes on verifing DMI pool data .... or when u try to enter the bios. This has started since i...
Summary: Learning to overclock safely takes time, and like johnoh said with his ( or her ) infinite wisdom that never fails, overclocking to 2.2g or even 3g ( ...
Summary: HELP ! I can't boot after changing the cpu clock speed in BIOS. System is an Athlon 1.9 GHz, KT7A mobo, radeon vga graphics card etc. System was alwa...
Summary: I bought an OEM athlon 2500+ cpu. It's a nice overclocker. What I am trying to find out is the stepping. I ran WCPUID and it gave me some helpful i...
Summary: Hey Guys, I just picked up a New Corsair 256 DDR PC3200. But when I slapped it into my Computer.. The Computer turned on, but I got no Video! Now when...
Summary: Help! I've just a got a new bigger case and so i fitted my motherboard, cards, fans, memory, cd roms,cables, etc from my old case into the new case an...
Summary: HI all, im new here so bare with me. So heres my issue.... I bought my comp from cyberpowerpc.com. I would use their tech support but im left on hol...
Summary: Ok, I overclocked my 1900xp to 2000 but them it got a little hot. Using a volcano 9 but no thermal paste, as I've never put any on before. Can anyb...
Summary: my brother bought me this old laptop and i need help. when i push the start-up button, this is what it says... PhoenixBIOS(TM) Version 1.03 Copyright ...
Summary: I am having a bit of a problem trying to figure out how to overclock my comp and I need some real help. I have a 900mghz intel celeron cpu on a cognac...
Summary: Running an XP 1800+ with volcano 7 should drop the processor speed to at least 45 or below. I don't understand why but maybe you should try to reappl...
Summary: I have a motherboard as mention above . My monitor is not receiving signal from motherboard. Already e-mail ecs tech support they said i need a strong...
Summary: I tried to upgrade the cpu to an 850mhz, but I think the CPU is bad, because nothing happened when i tried to turn on computer. So I replaced the old ...
Summary: my computer constanly beeps and dosent show the screen the weird thing is that is only beeps sometimes i have checked all the wires and ram and other ...
Summary: How do i overclock my 1.1 thunder bird . i have a abit kt7a v1.3 motherboard ,ati all in wonder 7500 video card. if any one can help me please help ...
Summary: Hi, I have a Abit KT7 (new bios) and a Thunderbird 1200 Mhz C. Can someone describe me how and with which tools i can overclock this CPU? Need ya help...
Summary: Can anyone help me to overclock my Pentium 4 1300Mhz on OS ME. If there is any other information you need just tell me what I need and where I can fin...
Summary: Hi, going to start building my new computer soon, and I'm confused about setting the clock speed, the frequency, the CPU I can figure out, but what sh...
Summary: I have a 1800+, 8KHAL Mobo, 512 pc2100 ram, 7200 60G hdd, dvd, cd-rw, tv tuner, sb live, gf ti4200@(305,627). I have managed to increase my fsb to 143...
Summary: I bought a combo special from pricewatch.com. It was a Duron 1.3Ghz with Asus A7V133 motherboard + fan + heatsink. I tried to overclock the Duron by...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
