Summary: I have a BeOS problem, i installed beos ( on win2k, ntfs ), when i boot to beos, i get the start screen, it thinks a little bit, the first 2 icons get...
Summary: Hi. I currently have BeOS Professional Corporate Edition. I tried to install it on my Pentium II 400, 256MB RAM, with a Gigabyte BXE motherboard. It w...
Summary: When you boot the computer you should see the lights blink on the keyboard. If they do not you might have blown the fuse on the motherboard. It is nea...
Summary: Well it depends... If the modem is supported then you should see a serial port available that is not one of the built in ports (i.e. if you have com1 ...
Summary: Hi, I bought a pctel chipset pci modem for my beos yesterday because of Beos support that.But i haven't use it.In windows it is on com4.But in Beos th...
Summary: Icons mean this. Atom: Indicates the handoff of the bootloader to the BeOS kernel. I/O Card: PCI initialization has been completed. Lightning Bolt: ...
Summary: I'm having this problem also. I think it is because BeOS reads the BIOS drive partition table and I have a drive overlay that maps my large capacity h...
Summary: Hi - I've just installed BeOs 5 PE on a Compaq Deskpro EP - Win 98, Celeron 333, 4 Gig HD, 64MB RAM, Matrox G100 Video. BeOs loads without problem fro...
Summary: I have some kind of frequency problem trying to boot BeOS 5 PE. The initial blue BeOS 5 screen comes up fine, but then the screen goes blank, with onl...
Summary: I installed BeOS 5 personal edition. The problem I am having is when booting the BeOS, all the icons light up, but then everything stops and there is...
Summary: hiya all... does anyone noe where i can find a patch for the so call fix to beos p4 1.4ghz problem ? my beos seem to send me to kernel debuggin land e...
Summary: I am trying to setup my ethernet card under BeOS so I can access my LAN. I have a NetGear FA311 networking card, PCI. However, no matter how much I fi...
Summary: In the installer it says I should be able to boot BeOS without using a floppy, but it doesn't seem to want to. It loads the BeOS bootup screen but th...
Summary: I'm having problems with my modem too - it's a Lucent Win Modem. BeOS doesn't detect it - I've checked all the settings in Windows and used the same o...
Summary: Misel, Are you using BeOS Personal Edition or Professional? Does BeOS boot okay when you boot from the hard disk instead of using a floppy? That is,...
Summary: The first problem is your Athlon XP. There are some answers further down in this forum. Either you need a patched kernel or you have to disable the SS...
Summary: I want to install Beos 5 Pro on my computer and having the following problem: My computers hangs himself when setup is copying files to my harddisk. I...
Summary: Hi, I ve got problem with my networking card. I've got a Cnet Pro 200 card, but BeOS didn't recognize it. One friend tell me that I must turn off PnP ...
Summary: The video card you have shouldn't prevent BeOS from booting. It will boot into black-and-white whithout adding a video driver though. I suspect the p...
Summary: Hi, I have installed BeOS Max 3.1beta on a secondary harddrive. The installation was succesful, but during the bootup the screen freezes. I took some ...
Summary: Hello all, I've tried to install beos on my computer (it's a Pentium 4 1,5 GHz, 512 MB RAM DIMM, Asus P4B motherboard, nVidia Riva TNT2 M64 AGP graph...
Summary: Hi all i have an urgent problem. yester day i installed soundblaster live! drivers and the other thing you need that goes with the kit from bebits.com...
Summary: I'm having a problem with booting beos. I'm able to install from cd creat a partition and install the os in its own partition. After reboot I get the ...
Summary: I recently installed BeOS Personal Edition and so far the only problem I've run into that I can't seem to immediately fix is this: There are four comp...
Summary: If it's corrupt, it's corrupt. I bet you used a dial-up connection for the download. Check for CRC errors in your connection. Many modems can give...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
