Summary: I currently have an AMD Barton 2800 XP on a Gigabyte K7 Triton - KT600 Mobo. I have it all up and running but am not sure if my FSB is set right on...
Summary: I've just purchased a brand new PC off a company without an OS. The Spec's are following: Asus A7N8X Deluxe Motherboard AMD Athlon XP 2800+ (2.083Ghz)...
Summary: Hi i've got a KT4V motherboard i brought a barton 2800+ and i know my motherboard supports it because i rang around and asked some people. but the thi...
Summary: I recently obtained a free Barton 2800+ (AXDA2800DKV4C)--266 FSB model. Now, I know the Barton is capable of a running at a 400 FSB (effective). My...
Summary: could be.. as far as I could tell, the cpus did not gradually gain heat (in fact the temp went down when idle as should be expected). Obviously some o...
Summary: hey, i have amd barton 2800+ cpu and vdata pc3200 ram (512 ddr, 2x 256mb dual channel enabled) and the motherboard is a msi make, wot is the best over...
Summary: Hello, my current configuration has my XP barton 2600+ running at 1.9Ghz and 333 FSB and my pc 3200 ram running at C2 latencies, also at 333mhz. Now I...
Summary: I have a little older MSI KT3-Ultra 2 mobo. I used to run a 2000+ Athlon on it, had the FSB at 133 and it showed up fine with 1667mhz. Now I tried to ...
Summary: Greetings to 1 and all Ok heres goes a friend (no longer in touch with) built my computer with an msi kt4v mobo (ok upto amd 3000) with an athlon 2000...
Summary: I have recently purchased a barton 2800+ athlon processor; 1. Can anybody please tell me how to check whether or not the processor is 2800+ or not, be...
Summary: I have an unlocked barton 2500+, a msi K7N2G ms6570 with 2 sticks of 256 corsair pc2700. I have it running at 2.09hgz fsb and ram running at 166(333)a...
Summary: Ive got thsi setup and this is my results: Http://imchat.mine.nu/temps.jpg Mobo = asus a7n8x delux Cpu = AMD Barton 2800+ & the heatsink/fan that came...
Summary: You don't really want to be messing with the Vcore. You really don't want to o/c your graphics card as well, as you don't have a GPU cooler. Plus ther...
Summary: ive looked at some forums and ive found out that a barton 2800+ will go to about 2.4 ghz wich is quite good seeing that it normaly runs at 2.23ghz and...
Summary: You probably have the Barton 2800+ that defaults 2083MHz (166x12.5), hence the reason for " each 1 fsb mhz the cpu goes up 13 mhz". Your mainboard sho...
Summary: Yeah you have to go into the BIOS (press the 'del' key repeatedly when your PC boots) and increase the FSB levels. You times the FSB number (you shoul...
Summary: Actually, the BIOS sets it to the type of the CPU and not the speed, so 2800+ is the correct one. Anywho... I got it to work! How, you may ask.. I dow...
Summary: ok guys i have a question. my motherboard's fsb speed is 100/66 MHz, and its processor support is Intel 370-pin Pentium III FCPGA/ Celeron 333 ~ 850...
Summary: Hey, Well, I have a Barton2800, and have OC'd it to 180X12.5= 2.25Ghz The CPU Temp is about 50c/114f stable Without Overclocking: 45c Should I revert...
Summary: My current system setup is: amd barton 2800+ @ stock 2088mhz msi k7n2 delta-l motherboard crucial pc2700 ddr 333 cas 2.5 radeon 9600 pro 60gb hit...
Summary: Here's my Question: I have 2 fans at the back of my PC taking air out, 1 fan in the middle taking air out, 1 fan in the front taking air in. Would it ...
Summary: I have a question, I have a Pentium D said to run on an 800mhz fsb however my ram is DDR2 PC2-4300 rated at 533mhz. Does this mean that my cpu is not ...
Summary: If I use DDR266 with a 333fsb cpu, will the cpu run at it's proper speed? athlon xp 2600+ barton and pc2100 will the cpu clock down to 11.5x133? ...
Summary: I need to change the FSB Freq. so that my motherboard will recognize my Barton 2800 correctly. It shows it as a 2200. When I'm in the BIOS and cahnge ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
