Summary: The SparcStation 5 was working fine, but it had the following problems after I successfully installed I/O Jaz drive and rebooted afterwards: Boot devi...
Summary: I have an ULTRA Sparc which has Solaris 2.6 installed, and has been running quite happily. However, I have rebooted the machine and all I now get is: ...
Summary: I have an Ultra 2 with Solaris 2.6 (5/98) installed. I create CD's using a Ricoh Media Master MP7060SE and CDR Publisher 4.85 as the unit platform ...
Summary: hello, i´ve got a problem installing debian 2.2 on a sun ultra 5. i´ve installed solaris 7 booting from the cd, but when i try to boot whith the debia...
Summary: I have an SUN Ultra 5 machine the current hard drive has an Windows NT load. I purchased Solaris ver. 2.5 and have the solaris Desktop ver. 1.1 cd in ...
Summary: I have a used sun ultra 5 workstation that I can't get to boot to solaris. I believe that the configuration is screwed up. I have no passwords so I am...
Summary: when trying to boot from cdrom, it says: Bad magic number in disk label Can't open disk label package Can't open boot device Any clue to what is cau...
Summary: I have a SparcStation 2 that I salvaged and will not boot from the internal HD right now. I am trying to install solaris 7 from CD. I have an ext...
Summary: I am having an issue getting Stop A to work on an Ultra 5 in order to install Solaris 8 from cd. I bought a used Ultra 5 and am unable get to the ok ...
Summary: i have an ultra sparc 5. when i try to boot from the cdrom, i get Bad magic number in disk label. what do i do? i tried boot cdrom. i tried boot cdrom...
Summary: Hello, I have a Sun Ultra 5. I am posting because I am trying to install Debian Linux on it and it does not seem to want to boot from cdrom. When I t...
Summary: I have a Sparc Ultra10 creator 3D. It works with the original hard drive and CD-ROM drive. I upgraded with original Solaris 8 install package without ...
Summary: There is a stupid option about setting to always boot to hard driver and it was carelessly selected when Sun Solaris 10 was installed. So whenever "bo...
Summary: Hi to all I have a sun Ultra 10 workstation with the following configuration SUN ULTRA-10 Workstation 440 Mhz CPU 1024 MB RAM 40 GB HDD Seagate (Co...
Summary: I'm having a hard time setting up a new install of solaris 8 on an ultra 1 creator with a barracuda ST19171WC. During the install I get a bad magic nu...
Summary: A bad magic number error (most likely) indicates the OS is having trouble accessing the new disk's VTOC (Volumne Table of Contents). If you know the a...
Summary: For knowing the hard disk magic no, I did in this way... $ dd if=/dev/dsk/ c0t0d0s0 of=c0t0d0s0_ label.bin bs=512 count=1 1+0 records in 1+0 records o...
Summary: Installing Solaris 8 on a Ultra 60 with an External SCSI drive and when running boot cdrom I get: configuring /dev /devices Using RPC Bootparams blah ...
Summary: does a cdrom need to have a specific label format? i tried to boot from a cdrom with a SUSE 7.3 iso image and received a bad magic number... can't op...
Summary: i have the same type problem, except i am doing a clean install of solaris with a new seagate ST19171N 9.1gig drive in a solaris sparcstation 10 with ...
Summary: I have a SunBlade 150 running Solaris 9 using gnome 2.0, and I can't seem to mount a cdrom. I've tried manually mounting numerous cd that work on othe...
Summary: I just got a sparc 20 to play with. It had a real small hd so I put in a 9 gig hd. I want to install solaris 8 on this machine and am getting a magic ...
Summary: Hello world! I have the same error. I'm installing a Tape in my Sparc 5. When I boot the systme without the tape it starts normally. But, the problem...
Summary: Dear Sir, We got two Sun Ultra10 .Say Sun1 and Sun2 The new Sun Ultra10(sun1) was working properly we wanted to put the whole software of the old Sun...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
