Summary: The method they suggested is recognised as the correct method. The machine you use as an initial BDC doesn't have to be a 'real' server, any decent PC...
Summary: I have a NT PDC and have a hard drive with same hardware as PDc that I would like to use to create NT BDC. TO make it easy I though I would use image...
Summary: i hade a compaq proliant 1850r with 5 hardisks,raid 5 is configured as a fault tolerance,and nt 4.0 pdc as a operating system. i installed it 11 month...
Summary: It depends, obviously, on what the server does. Our PDC hardly ever gets rebooted (about 3 times in 18 months) and it works fine. The BDC never gets r...
Summary: Hi, we have 3 NT 4.0 Enterprise server and one DLT drive. All the server on same subnet (network), can i use single DLT drive to take backup of all se...
Summary: Hi Our office recently purchased a CD Writer and we are trying to create a backup of our WINNT Server cd to send to our regional office in Dallas. Un...
Summary: i have my windows NT 4.0 domain and i have there manay users i want to upgreat my opreating system windows NT 4.0 to windows 2000 server, i want to kn...
Summary: Anyone know which version of NT was the first to support long file names? I've used NT 4, but none of the earlier ones. I was wondering if any of th...
Summary: Hi, all I want remote boot service of nt server 4.o for ruuning a Windows-98 on diskless nodes. I want my network pure IP. However , Win-98 is runnig...
Summary: I know it isn't legal, but I have a 25 user copy of NT Server 4.0. Will my network still function if I install that copy on another server, but for t...
Summary: To do a proper backup of Exchange Server I would suggest that you look to a professional backup package such as Veritas Backup Exec. With this you get...
Summary: I had to restore a backup of my PDC (Winnt-SRV)... Now i cannot log on to the Domain from ANY workstation (ID 5722). Error:"There is no machine accoun...
Summary: Don't apologize. There is no such thing as a dumb question. 1. Is that hard drive dual booting NT/98? Or you just want to get rid of NT and install 98...
Summary: Hi , there's no need for that, because you can call the unattended Setup of the ServicePack 6 after Installation of NT. For unattended Install of NT t...
Summary: i want to use the boot manager of nt for boot other S.O. but don't NT, i want to boot with win95, wind98, linux with the boot manager of nt without in...
Summary: Hi everyone, thx for taking time to read this post. I'm planing to install a backup solution to a Nt 4.0 server wich is actually running the built-in ...
Summary: I am running a 12 user NT office and NT Server. I have 5 large boxes of 5-1/4 & 3-1/2" disks that where backed up using MS Backup for DOS and I am no...
Summary: I have a complete backup of the disk, regisrty and ERD. I am simulating a complete system disaster. Hence I wish to Build an NT PDC from scratch, and ...
Summary: Hi, I have recently been given the role as an NT Administrator. However, I am a systems programmer and know next to nothing about how it all works. Ev...
Summary: If you backup NT using "RDisk /s" you can uncompress the contents of the Repair folder and copy over into the Config folder over a clean install of NT...
Summary: I've got a new BDC setup with our old PDC. I've already synchronized and I plan to take the PDC offline and promote the BDC to the PDC. With me so ...
Summary: I was just trying to backup registry files on NT systems,but i was getting errors while doing that,as they are used by Windows.How should i come acros...
Summary: Just a shot in a dark, but try booting VGA Mode. This may either reset the screen res. for the DEFAULT profile (which is the set of settings for the ...
Summary: Win NT 4.0 can set with -Primary Domain Controler PDC -Backup Domain Controler BDC -Stand Alone And can set up to another type of server ???. Can I...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
