Summary: I woud like to upgrade the cpu of my Pc, which has a Asus P2B-DS MB with a iPIII 550 Mz installed on one of the two Slot 1. I'll upgrade also the Ram ...
Summary: I have a computer with an Asus P2B-F motherboard. It currently has a 500mhz P3 cpu (slot 1) in it now. i want to upgrade that so i can play Grand Th...
Summary: I think the Celeron will run at 100MHz FSB and the mobile P4 I guess at 133MHz. And Yuchao719 is right, the Bios has to support the cpu or it will ...
Summary: "If i to build a system now, i will get a dual core CPU" Why?? Explain your reasoning.... "Do you think I will see a (big) difference when going from ...
Summary: 1) The manual is only actual to the date you bought the board. If ECS says the cpu works with a bios update it should work! What can happen is quite s...
Summary: The problem is that the P2B has an AGP 1.0 slot (up to AGP x2) and an AGP x8 card is AGP 3.0. The AGP definition says they are only compatible 1 numbe...
Summary: Trying to install Asus P2B motherboard with existing HD. HD has Win 95 installed with existing software. Upon install and start-up with "new" mother...
Summary: I have a Matrox MGA-G200A-D AGP Video card and when i put it in my Asus P2B Motherboard and nothing comes up on the monitor. Do i need to set someth...
Summary: I have a ASUS P2B motherboard (FSB 100mhz). I just wonder if I can use the 168 Pin single sided 8 chips (256mb each), which is Transcend JetRAM code ...
Summary: Hi, setting a 66MHz cpu to 133MHz is a bit too much for it. My Celeron 733MHz run with 112MHz FSB at 1232MHz but only as long as I keep it at 41°C or ...
Summary: unlikely to be any motherboard jumpers for ram. you could try this to see if helps, use the CMOS battery jumper reset. This is usually a jumper , but ...
Summary: What FSB and Slot does your motherboard support/have? The P4 2.4gHz is probably a socket 478 and it came in several different varieties in either 400,...
Summary: Can IBM PC300GL/Series 689283U have cpu upgraded to Pent III 1.0 Ghz CPU? Is there DIP swithces that need to be changed to accomadate this? If not 1.0...
Summary: why u yelling at me chief :) not all a31's had the 1.9. mine has a 1.6ghz p4 in it. i'm over the cpu-upgrade rush. it runs well as is. new question ab...
Summary: Someone gave me a motherboard that I want to use to build my first machine. They didn't have the drivers. One Web site seemed to say that I needed t...
Summary: hi i have an old mobo i want to get a cpu for i have asus p2b rev 1.02 with a p2 333mhz cpu ocd to 375. how fast cpu could i have? i am not very exper...
Summary: As long as you don't own an OEM board you would only be able to go up to a 1,1GHz Pentium3 with coppermine core. I've been there about 2 years ago as ...
Summary: RAM: ------ With Windows2000 I'd go with 512MB but 256MB maybe enough but a bit slower. But I just encountered a strange thing, the manual say maximal...
Summary: We covered this in an earlier post...you're entire system is one big bottlencek to your 6800. Upgrading the CPU isn't gonna help...you need an nForce2...
Summary: Hi - I have a Compaq 5000 series PC with a Socket A 700 mhz Duron CPU. It runs PC100 RAM. I understand that this CPU can be upgraded as high as 1.4 gh...
Summary: I have a K7T Pro2-A (MS-6330) motherboard with 1 ghz thunderbird cpu. The MB can handle a cpu up to 1.4 ghz. If I upgrade will there be a big differen...
Summary: According to the producers website, the motherboard I have will support Socket-A for AMD Thunderbird/DuronTM uni-processor at 200MHz Front Side Bus wi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
