Summary: We are experiencing real problems with our Arcserve 7 system backuing up Netware 5.1 box's. The fault is the backup server intermittently fails to co...
Summary: We run Arcserve 7 Enterprise on One 5.1 server to back up parts of two other servers. Ensure that you have a healthy network - e.g. ensure slp and DA ...
Summary: With NetWare 5.1, it is true that the NetWare kernel doesn't make complete use of multiple processors, but NetWare 6.0 and later do. If you load ACPI...
Summary: I am trying to install Netware 5.1 from the CNA study CD's. I get past the Netware title screen and it finds the time and time zone then gives me a p...
Summary: I'm not certain about the method being the same with NetWare 5.1, but with NetWare 6, you would start the NWCONFIG utility and use it to select and in...
Summary: Can anyone tell me if it is possible to send a message from a DOS prompt using Netware 5.1? I have copied NWUSER.EXE from version 4, but when I run it...
Summary: Running Arcserve 6.6 on a Netware 5.1 box. I'm getting lousy throughput to the backup system but I've patched NW 5.1 and Arcserve 6.6 to their most...
Summary: We've been having an intermittent problem with one of the workstations on our network. Perhaps once every couple of weeks it will be unable to print. ...
Summary: Hi everybody, I am a german guy who has some problems with his Novell 5.1 using the dhcp service. We are Using a Novell Netware 5.1 Server with dhcp-s...
Summary: We recently upgraded to Netware 5.1 from 5.0 and now we are having problems with our backup operations. We use Backup Exec which ran ok before the up...
Summary: I have installed Netware 5.1 on an IBM server with Pentium 4/512 MB RAM, 36 GB SCSI etc. My problem is when I open the connections options from Conso...
Summary: I have a problem in printing in netware 5.1 some of the users can print and some of them can't. So to me its seems logical that it is a rights issu...
Summary: Hello, I am trying to setup printer sharing with netware 5.1. Most are Win2000 boxes with local printers. With win95/98 we used nprinter (NPTWIN95) to...
Summary: Hello guys, I have a question about NetWare 5.1 serve we just build. I read that NetWare 5.1 comes pre-build with the mail server, I installed the ser...
Summary: I hope this helps... I have the same router (BEFSR41 v2) and NetWare 5.1 and have the Netscape Webserver accessible to the public network and private ...
Summary: Hi, I'm trying to upgrade a Netware 5.1 sp1 box to sp5, and keep having problems with the installer hanging. It's when the installer is shutting down...
Summary: I have upgraded to Novell 5.1 and am using NDPS printing. I have HP 4000/4050 printers on the network. Problem is that when printing from Word every...
Summary: NetWare 5.1 Installation Failure I complete the beginning of install and when it begins to load the GUI (white NetWare background, the installation wi...
Summary: Hi Underdog, The SCSI devices are terminated rite with no conflicts on devices. During m/c startup, the BIOS is able to correctly detect these hard di...
Summary: We are having problems with our NetWare 5.1 server. It keeps having critical errors in various different places and restarting itself. It is not alw...
Summary: I do an 'nslookup' from my workstation which was working allright until recently when I played just a bit with my Netware 5.1, SP8 patched, edirectory...
Summary: Hi, I have a old Pentium 2 450mhz, 384RAM, 2 10/100 NIC's, 20gig Seagate 7,200 RPM IDE and 18gig Seagate SCSI 10,000 RPM drive. Adeptec SCSI PCI card....
Summary: Fairly early on in the process, in fact: Machine in question is a P133 w/128MB RAM and a 2GB drive. I've been asked to configure it with NetWare 5.1 f...
Summary: I am trying to Install Novell Netware 5.1 from the CD which came with the CNA Study guide book, Half way through it comes up with a message No one de...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
