Summary: Your CPU is overheating! 195F = 91C! That's the max safe temp before burnout! Don't do a thing until you get the heatsink installed correctly. Follow ...
Summary: Thanks for all the help guys. Turned out it was a bad Mobo after all. Replaced the Mobo and now everything works perfectly. Thanks for all the idea...
Summary: My computer shutsdown when I go past another above 2.5, buts running cool at 30c I talked about this in one of my other threads, but didnt anywhere. A...
Summary: well i have a intel d865perll and i use the OC program intel desktop control center. and for about a week i'm getting an error message, "an unexpected...
Summary: thanks for the advice. and so quickly! well i'm off to making another problem with my computers. trying to make an AT power supply work with a MATX mo...
Summary: Nevermind anyway.. I think that he is better than Intel because I have him... But ive got another problem: Ive already wrote this but i didnt get an...
Summary: You have a 100mhz FSB CPU & a board that only supports up to 75mhz FSB, not to mention that you can't run the CPU at the proper voltage. Your choices ...
Summary: Alright. Here we go ago AGAIN. I posted a message on 4/30/04 about overclocking CPU via FSB, which I've successfully done. I knew that I wouldn't b...
Summary: I'm using Stock Intel HSF in the following systems; 1) P4 2.4C OC'ed to 3.2 idle 38C and stressed Prime95 49C. 2) P4 2.6C OC'ed to 3.31 idle 40C and s...
Summary: mad thanks but now another problem. i got two sticks of 512mb ram and when i try to put them in manual settings with out changing anything, the comp d...
Summary: I wouldn't say so! The problem is that there are not two cpus who are really the same because of the production methods of their internal elements. Ev...
Summary: Another problem is that the English speaking world is getting smaller and weaker day by day. When the Spanish lost half of the world to England, many ...
Summary: ok well now i know why it does that but know i have another problem. i got the ram posting the same as the cpu but now i put the cpu to 234 or higher ...
Summary: the problem is...it's not my board, its actually my friends and according to him it has never rebooted properly. it boots fine..and you can get into...
Summary: Hi, Thanks for your help jam with my 3500+ but i got another problem, i can only get the fsb to 231, if i put it on 232 it loads windows but when i go...
Summary: Well, thanks for all the solutions, I tried them all. Another problem I was having was with the onboard sound. Both the volume and the mic are barely...
Summary: Hi, I think this is a video card conflict but when I start my pc, the actual hard drive and processor turn on and start working.. but sometimes the v...
Summary: Thanx for reply. I heard that cpu with HT technology are likely to get hotter. I think extra fan may cool it down...or Will it add more to the noise? ...
Summary: I'm looking for the manual of this oldie. Or maybe someone can tell me how to set the page length for small forms. Also another problem, before each p...
Summary: Hi, Can someone help me? I have Asus A7N266-VM motherboard and AMD Athlon XP 1800+ cpu. I want to overclock the cpu but I don't know what to do. I sea...
Summary: I have a Asus P2B with touch 133 mhz memory. I tried overclocking the CPU from 100mhz to 133 mhz -> 350@466mhz pretty stable. But a lot of heat. In th...
Summary: Hi, I have an Abit KG7 motherboard with 512 megs of ram and an Athlon 1500 XP on my system. Recently, the bios sent me the following error code on a c...
Summary: I uped my ram +0.1 and i cured the hanging at the point it was hanging but then it rose another problem, it scans the HDD for errors ect and finds tha...
Summary: Just check if the new CPU you want to use is compatible with the board and the chipset on it. Usually you also need a bios update to support the new c...
Summary: damn your good. That is the problem but I'v ran into another problem. You see my stepdad was mad at me 1 day so he set a password on my computer so th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
