Summary: I am using Ares (a music downloading program) on my computer. It doesn't allow my connection because of my router firewall. I was wondering what I hav...
Summary: Yes, it works when when I connect the computer directly to the modem, which is why I agree that it is the router's fault. I installed Ethereal, but th...
Summary: Knowing the make/model of you router would be helpful. However, not necessary if you can read/understand the manual for your router. It should have ...
Summary: Hello, I have a Netgear 24 port router and 23 systems networked using p2p in a three story building. My question is if there is an easy way to find o...
Summary: "I had ports opened for the IP to allow for a better NAT" Say what? Thqat makes no sense, the NAT doesn't get better or worse by opening a port. but t...
Summary: OK. I know how to do it for 1 computer using Port Forwarding or DMZ setup, but I need to have open ports for 2 PC's. I want to use games, IRC, Donkey...
Summary: ok, i have an SMC router which i have had for about 4 months, and since i got it, i have been trying to open ports on it. I know how to get to the set...
Summary: mmmmm, sorry Wonderer I think you don't understand me, I am trying to develop a java program within I can forward a port on my router sagem (and it is...
Summary: I have 5 computer systems, a cable modem and 2 routers. I had all 4 systems and the cable modem connected to the one Router (DI-704P Rev A 2.56 build ...
Summary: I have a 2501 router that i bought from an auction to study from for my CCNA exam. It didnt come with an IOS image file in Flash so it boots up from R...
Summary: I recently tested my computers security by probing my ports i found all ports closed except one..port 80. I went on router setup page and found a sett...
Summary: hey guys, can some one explain me about how a UPLINK port connection help? Connecting two or more switches via an uplink allows you to extend the numb...
Summary: if your computers have ethernet cards, then it would be easier if you had a broadband router, which would take internet and split between the two comp...
Summary: Hi guys, have set something up which i think should work but isn't so I thought I'd throw it out here to see if anyone can help me. Here's wha...
Summary: Unfortunately the software I have been provided by the broker isn't either proxy aware or getting proxy information from internet explorer settings! I...
Summary: One more thing. Are you connecting your modem to router then router to switch? Thats what I am trying to do. So would I take say port 4 on my route...
Summary: Here's the deal. I have a realtek 10/100 integrated LAN port on my MOB. The other computer I want to network is a 3COM 10/100 PCI card LAN port. I h...
Summary: Really there is only about 3 things it can be , nic you said you replaced it and same problem . Port on router went bad , routers usually have mo...
Summary: Hi, I am trying to share my DSL (verizon) connection with 3 computers, (1)W2Kpro configured to be used as a server, (1)Compaq with XP pro, and (1)sp...
Summary: A modem is required with DSL no matter what. It's what separates the signal. Normally a DSL setup (like mine) is as follows: Phone line >> DSL Modem...
Summary: Hi, i have a strange problem thats confusing me, I'm using Verizon DSL and a LinkSYS BEFSX41 router. The problem is while using the router my dsl spee...
Summary: Is it just me or is this tread rather confusing? The correct wiring is; Phone cable to modem. Ethernet cable from modem to the wan port of the router....
Summary: Hello guys & gals, I have the following network and am seeking some advice. ROUTER 1 (SONICWALL) - Don't have access to this one since our computer pe...
Summary: I am running a server off my windows 98 computer, but all other computers have windows XP. I know how to open ports on XP and i'm just wondering if t...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
