Summary: Okay, I think I've changed my mind from installing 3.1 to 95 or 98. I'm mostly doing this since I've lately been missing the old times. I'm going to b...
Summary: Is your hard drive partitioned? If not it would need doing and making the partition active.(Using Fdisk on a bootable floppy) If unable to do it yours...
Summary: I would like to install a new hard drive in my old 486dx running windows 3.11 and i have come to a grinding halt. I inserted the 2nd hard drive into t...
Summary: I have one of the most now common 2 Gig hard drives out there. Can this be partitioned into several 500mb sections and then used with Win3.1? I alrea...
Summary: try the hard drive on another computer if it works then u just have to format and set that partition active on your own computer upgrade your bios ...
Summary: i had a problem with my 486 computer running 3.11. it is in the computer itself and the hard drive is fine. I have another computer w/ a pentium 100...
Summary: Hi I have an old IBM-PS2 working with a 286/15mhz processor. (and 1024kb of ram) My hard drive doesn't start. When I put power on, I can see the littl...
Summary: Hi,I tried to upgrade my hard drive to 1.2gb from 171 mb on my ibm 486 dx2,it did not work,now my old drive will not come back in it keeps telling me ...
Summary: i had to reinstall my hard drive in bios what does WPCom and LZone mean when setting it up? How do I fouynd out what they are on the hard drive? ...
Summary: hey i try to use my hard drive.But it wont work and when i go to run it says "APLICATION EXECUTION ERROR"CANOT FIND COMPONENTS CHECK TO INSURE THE PAT...
Summary: I have a Quantum ProDrive model number 40 S its 40mb in size, and it is an SCSI hard drive. I installed it on my 486DX33 and accidently formatted it u...
Summary: Ok I have an Idea but I'm not sure if it will work I have a Computer that I want to restore for my Son The only problem is that It has Win 3.1 . Its ...
Summary: Hi Neo: I also think you're out of luck if you dropped the drive (not covered under warranty), but you can still retrieve data at a BIG price from a d...
Summary: i have obtained a 2 gig drive which i was plaaning to add to my 486 dx 33 running dos 6.2 and win 3.1. My problem is that i only have two cable point...
Summary: I'm running a 386 clone enhanced to 486 with 8 meg of ram, windows 3.11. I keep getting a .swp file appearing every time I boot up. It's about 43 meg ...
Summary: Need to clean hard drive as someone tried loading win'95 on my SMALL pc and now I cannot reload win 3.1. I reach the 3rd setup disk and find an error ...
Summary: Long story, but need to format an old 200 m hard drive for DOS 6.2 or Windows 3.1 I used the standard formatting, but immediately get an error message...
Summary: Hi, I am working on an Hp vectra Admin 5 4/66 I went to open it up to install a cd-rom and found another hard drive in the place where the cd rom i...
Summary: I have an 486 computer, and when it starts failed in the test of the hard drive. It says: "Hard drive diagnostic error". Is the hard drive corrupted o...
Summary: I am installing a second hard drive and configured my jumpers for slave configuration. Unfortunately my CMOS does not automatically configure my sett...
Summary: I am using a Packard Bell Legend 486DX -33MHZ box with 36 MB RAM. I installed a second hard drive several months back and it has been running great. ...
Summary: I obtained a second hard drive and went to put it into my 486 dx33, but the y ribbon is already being used by the 1st HDD and the CD drive. There is ...
Summary: I am getting rid of an old computer running Win 3.11. I want to clean out all personal info from the hard drive first. How do I do it? Thanks. ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
