Summary: my PC's Case is ATX Form Factor can i fit a MICRO-ATX form factor Mainboard in there ?? i.e. would the casing's screw holes line up with the Micro-ATX...
Summary: i have an AT form factor board and VIA MVP4 CHIPSET (onboard sound and video)I installed windows ME on a formatted hardrive -it was terrible, grphics ...
Summary: from intel.com on the old Pen 2 processors: Thermal Management Considerations, measured at the center of the processor’s thermal plate beneath the fan...
Summary: Help! My computer has always shut down properly for the last three years. It is an ATX form factor motherboard and power supply. I upgraded to WinMe a...
Summary: when i install windows xp will i have to get new drivers for my mobo and grafics card..my computer is only 7 months old its a gforse 2 mx 400 not sure...
Summary: Check out this link http://www.pc.ibm.com/qtechinfo/MNOK-425LJ2.html?lang=en_US&page=brand&brand=IBM+Aptiva&doctype=Product+information&subtype=All T...
Summary: It looks like that I have to get a new power supply, mobo, Hd, and cd-rom. By what skip has posted my system is like the Dodo. I have found some new...
Summary: Yikes! Well, you can't change the BIOS . First off, ask the clowns at Gateway IF there is a flashable upgrade to your MB BIOS that will enable the PC...
Summary: i have a gigabyte mainboard dualbois Model name: GA-7ZXR VIA KTI333 AGPSET Socket A CPU 3 DIMM / ATX Form Factor ATA 100 W /RAID can u just give ...
Summary: Everyone is speaking of cases but we all must remember that there are various form factors when speaking of cases and mobos! There are; AT, ATX, & bab...
Summary: Hello Rob. Do you know the Manufacturer of your board? Like ASUS, MSI or SOYO. What form factor, AT or ATX. What CPU are you running? Is it a current ...
Summary: Specifications: Advanced features: Supports Pentium III 450~500MHz, Pentium II 233~450MHz microprocessors with frequency at 66/75/83/100MHz in Slot 1 ...
Summary: What is the printable area of your printer? printers cant print the whole 8.5x 11... because of the traction mechanism and the margins you can get the...
Summary: OK then its the Linksys card. They are cheap and will work on only one IRQ. Regardless remove all of the other cards and reinstall the NIC see if that...
Summary: Ok, this is what happened. I bought a Solo 5100 online and it came with a 266 MMX chip. I took off the keyboard and wanted to look at the form factor ...
Summary: Hi Guys, This is my first time building a system and I just wanted to know something. I have a PCCHIPS M748MR Slot 1 motherboard right now(Baby AT Fo...
Summary: the RIMM have to be the same density, speed (Mhz), and form factor RIMM-Rambus-RDRAM, They have to be put in by pairs. And all the slots have to be us...
Summary: I am looking for someone to help me with building a database. Preferably someone in Brisbane (Australia)as I would like to be able to sit down and ma...
Summary: I'm using a document template in Word (Office 97) that contains form fields. Word's spellchecker does not work in the form fields, locked or unlocked...
Summary: Well after Local42 pulled his head out of his ass, s---ting on about how much time he has to fondle the likes of win98se, i mean, WHY ? he has to much...
Summary: I don't know what the problem is, it started a few months ago.. when i Fill out forms or submit them it lags really bad like for example when i Put my...
Summary: The first time I did this I copied favorites and when I went to install them they were all seperate and would not load so when coping to zip drive I j...
Summary: hello goto your hard drives makers and d/l low leavel formatting tool. and have a look over these http://slashdot.org/article.pl?sid=03/01/15/234521...
Summary: IE Freezes whenever i try to submit any forms like this one now, it will freeze for a few seconds then submit it .. i dont get it i tried everything p...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
