Summary: Having real big problems trying to get my drive to run at a normal ATA/100 speed on an Nforce2 IDE controller (not PCI). It's behaving like it's in PI...
Summary: Having real big problems trying to get my drive to run at a normal ATA/100 speed on an Nforce2 IDE controller (not PCI). It's behaving like it's in PI...
Summary: Hi, Might be a stupid question but I have a motherboard ( Asus MB P4V800D-X ). It has SATA for the hdd' (says in the specs). My question is: Can I pl...
Summary: I currently am on a computer that I built with an nForce2 chipset and am using an ATI video card. It's a recent build and I haven't experienced any t...
Summary: went and got another vid card geforce2 still the same problem it only works when i disable onboard in device manager but as soon as i reboot it reinst...
Summary: From my personal experience, Abit does overclock better. However, I've seen a history of Abit boards developing problems after one years worth of use...
Summary: As i have a serial ATA on-board adapter i'm thinking whether i should use this or go for SCSI. Which one would you recommend i go for? Also are SCSI C...
Summary: Good evening. So I went and spent 10 euros in the old man's shop and came home with an MS-6667 board. Turns out it has another name too, K7N2GM-IL. I...
Summary: Is ˇĄCHAINTECHˇ¦ motherboard good for AMD? I mean its features, stability and so onˇK How about it compares to the other brands, such as MSI, ASUS, A...
Summary: Have been a GoBack user since it was originally produced by Adaptec in 2000 (v2.2). Then it was sold to Roxio and then Symantec Norton. I think Syman...
Summary: Like they were saying the ATA100 or ATA133 is the ransfer rate at 100mb/s and133mb/s respectively. The ATA and EIDE can be used interchangably. They...
Summary: The theoretical peak bandwidth advantage of a p4 over an xp is not reality. A 533fsb p4 is way more memory constrained than is an xp on nforce2. An ...
Summary: The computer gets stuck on POST when the two main optical drives are not hooked up. It won't boot with just one optical drive or no optical drives. It...
Summary: I don't know about that Biostar board. And check the MB website for a list of DDR400 that has been tested and certified by them. The 2400XP is a 266...
Summary: I don't like to admitting I don't know everything, but let's face it, LMAO. Well, for some strange reason, my sytem has suddenly decided to boot up an...
Summary: Am I wrong but this thing is very good ? Something strange cause i never hear about that technology. Is dual ddr is only on nforce2 chipset ? So is...
Summary: Yes I did it with adapters from ide to serial ata. It was a TDK cd-rw and a Sony dvd 510a. I was the on board serial ata on an asus A7N8X-deluxe. I wo...
Summary: I have a Western Digital 40GB drive set for ATA 100 right now. But I am running it on a board that can only handle up to 66. Is this okay or safe? ...
Summary: I noticed that ever since I put my OS on my Serial ATA HDD it loads up really slow when windows is booting and the HDD has 10,000 rpm! It doesn't even...
Summary: Hi, Could someone please tell me if it is wise to buy a ATA 133 Hard disk to fit on a board that has a chipset that supports UDMA (Pentium 3, Aopen MX...
Summary: I have an ATA-33 DiamondMax hard drive. My motherboard is dead so I will be buying a new Gigabyte GA-7VKML one, which has IDE slots that 'support ATA-...
Summary: Hi, I'm making a computer and don't want to blow up on my first try(I already bent a pin on my athlon xp on installation). What I want to know is: Is...
Summary: I'm looking around for a motherboard. Many these days seem to have only one Parallel ATA IDE interface and a whole stack of SATA interfaces. Most opti...
Summary: Hey guys, I've just bought a new mobo (Leadtek WinFast K7-NCR18GM) and a shiny new ATA/133 HDD with a shiny new ATA/133 cable. The performance of my H...
Summary: I am having problems getting a new 9800 pro working on Asus A7V8X-X. Have gone through all fault finding (PSU ok/replaced RAM etc etc). Looks like KT4...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
