Summary: There is bios flash i had version4.51 pg.Dodnt see a boot block in bios or a jumper protecting it.Or a bios pw.Tried removing bios chip and one leg br...
Summary: I have P4P800S motherboard. I just flash the BIOS but after rebooting it said: BAD CMOS Checksum F1 for setup and F2 to load defult values. whichever ...
Summary: Hey Nordo, Could be either a bad MB component or a bad BIOS. Only one way to find out, you either need to find out where the POST process is stopping,...
Summary: I flashed my bios today to the latest version.WhenI went to Belarc Advisor to get some specs I noticed that some info had changed since the last time ...
Summary: There's a reason why every mainboard manufacturer and every mobo manual says *NOT* to flash the bios. Daniels advice may be okay for many professiona...
Summary: I have a shuttle motherboard, as well, and easily downloaded the newest BIOS flash update from their website. Look here for the download and a histor...
Summary: You can make a bootable floppy from within Windows. Right click on drive A: from windows Explorer and select format. Click create MS-DOS startup dis...
Summary: Hi...How are you? The reason for typing my message here cos i am in deep trouble. The problem is i am using Amptron's M537 motherboard with Award BIOS...
Summary: client dropped off a pc that wouldn't boot today. He had flashed the bios of his Asus P5A board with the wrong BIOS and it will not boot. How do I r...
Summary: Computer WAS an emachine till motherboard burned out. Replaced with an ECS motherboard L4VXA2 that worked fine until a San Disk 4GB Micro Curzer was i...
Summary: Have you looked over the board to see if you can find a make/model number printed on it somewhere? Usually between the PCI slots is a good place to st...
Summary: Red Rider: Thanks very much. I had already downloaded the manual from the MTI website & only briefly looked thru it. After reading your post, I went b...
Summary: >> I used the Flash Menu program that Abit released, which runs from windows << Abit's BIOS flash programmes run from DOS, and thats pure DOS, n...
Summary: Hi. I live in INDIA. I just got a new ASUS A7N8X-VM/400 motherboard through my uncle in USA(he bought it from the internet and mailed it to me). A hou...
Summary: A bad BIOS flash will mean a bad BIOS and possibly a dead MOBO. You should only flash your BIOS for a good reason. You should always flash with care...
Summary: if it has jumpers, you might need to set stuff up like clock speed (mine is jumperless, except for one jumper which is used to clear cmos). otherwise,...
Summary: Did you use a new floppy disk? The fact that it still beeps and tries to access the floppy drive shows that it has a BIOS recovery feature. If you can...
Summary: I once saw this exact problem on an amd based system (I think it was an athlon 64 3300+ or something similar). The only thing that got it to boot was ...
Summary: The first question we would ask is WHY do you want to do a bios update? Are you having some kind of problem that will be addressed by a bios update?...
Summary: I tried something plain stupid. My x800gt is now flashed to a x850xtpe with crossfire. Having already flashed it to a working x850xtpe and getting bet...
Summary: ok, so you have two options here, admit defeat and use your mobo as a paper weight, or do a hot flash, I'll hook you up with a link, but what you will...
Summary: bios flash protection is always a jumper. Look on your mobo with a flashlight and magnifying glass for tiny letters next to each jumper to find it. ...
Summary: A bad battery will not let you detect floppy, it will still boot up. It should be bios corrupted, either from bad bios flash or bios chip going bad. Y...
Summary: Does the BIOS recognise that CDROM drive is connected? You may need to get into bios and enable auto detection or there may be some other setting you ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
