Summary: Hi, I have a Peak 9600PRO. It has come clocked at defualt at 398.25 Core And 195.75 Memory. I have put some Aluminium Ramsinks on the RAM both sides, ...
Summary: You didn't specify what type of RAM you are using. Your fsb overclocking potential will be limited by the FSB of the RAM. If you have 333mhz ram then ...
Summary: i've been planning to buy the 2500+ also (its a good overclocking cpu). The abit nf7-s ver 2.0 probably has the most overclocking potential out of all...
Summary: I am looking at this cpu and have heard it has awesome overclocking potential. Is this true? Its a OPTERON 144 1.8GHZ http://tinyurl.com/rzmte ...
Summary: I bought a new retail newcastle athlon 64 3400+ 2.4GHz a week ago which I successfully overclocked to 220FSB (*12 multiplier = 2640MHz). It worked gre...
Summary: X-bit Labs rated the Celeron D quite highly actually, especially for it's ability to be overclocked: http://www.xbitlabs.com/articles/cpu/display/cele...
Summary: Close, but no cigar. What type/speed RAM do you have? PC2100, PC2700, or PC3200? Is your CPU a Palomino or TBred? Is the multiplier locked or unlocked...
Summary: I bought a custom built computer with this processor. First off i was wondering how does this processor stack up to lets say a pentium d 3 ghz compute...
Summary: As I tried to explain, the P45 chipset is designed to run at 400MHz...there should be no reason to increase the NB voltage. If anything, you *may* nee...
Summary: Overclocking AMD CPU's can be a bit complicated because there are so many settings that need to be adjusted...but once you get the hang of it, there's...
Summary: Yes, I use omega drivers in order to overclock a 9600se and here's what I've noticed with the latest omega drivers: Benchmark performance was down sli...
Summary: I had a P4 2.4GHz with a 533MHz FSB, and used that with a 800MHz FSB motherboard and PC3200 RAM. When the default settings clocked the system, I got t...
Summary: Northbridge & Southbridge is not exclusive to Intel....AMD, VIA, ALi, & nVidia all use that configuration. I believe SiS was the 1st to go against the...
Summary: "http://www.buyxtremegear.com/k7ncr18dpro.html Best I can find." That's the board I got :-) Very fast motherboard and very reliable, amazing overcloc...
Summary: Folks, I just put together my new box. The specs are: Antec P180 case E6400 2G Ballistix (1G x 2) DDR2 PC2-6400 Gigabyte GA-965P-DS3 Radeon Z1950XT 25...
Summary: Hey guys.. I know this question might seem stupid to some of you, but I'm not very familiar with that stuff, so don't laugh ;) I am thinking of buying...
Summary: What about the HTT Multiplier, don't you have control over that? The HyperTransport bus link of most AMD processors is designed to operate at 200, 400...
Summary: In some tests 9500 blew away 9600. I dont think 9500 is available anymore. I would suggest 9600 because it has more overclocking potential than 9500 a...
Summary: They did NOT use DRR2...AMD doesn't even support DDR2! They used DDR600 RAM, which is the same as PC4800. The reason they used PC4800 is because it's ...
Summary: You need to make a price/performance decision going in. You can put a Cooler Master IHC-H71 http://65.174.51.5/cgi-bin/sundial/ihch71.html on a 400m...
Summary: 2500+, and 3200+ are mfg from the same die, on the same wafer. 3200+ is about the maximum speed for this chip generation. Because of this the 2500+ ca...
Summary: hello guys, i can get a 2500+ for 88 and 2600+ for 95, and 2600+ runs at 2.0Ghz at 1.45V is it a better one? will its overclocking potential be highe...
Summary: Put your Sempron up for sale, hopefully something that doesn't know any better snags it at decent price (ebay is choke full of folks like that)..........
Summary: there have been many bios updates since 1003 and some have fixed bugs so you might get the current one. No reason to though if you're totally stable....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
