Summary: I have a dual boot system (98/2000pro). I have a p4 1.9, Gigabyte GA8IGX. I had 256mbDDR pc2100 and all was well. I got another stick of 256DDR pc2...
Summary: I have had many such problems with dual-boot (mostly with LINUX and w2k) and anymore the first thing I will do is to boot with a windows 98 boot disk ...
Summary: I am having severe trouble trying to get the Dual Boot on WIn2k to work with my win98se partition. The problem is when I installed W2k, I intentionall...
Summary: I have just converted my file system to FAT32 on all 3 of my partitions. The problem is that after doing so the Win98 Fat32 converter altered my boot...
Summary: HELP WITH DUAL BOOT!! eeeek ok right.. I had a dual boot with ME and 2000.. then i formated the partition with ME on it then installed XP onto that ...
Summary: No problems with dual boot Linux/Win2k. Just did it - and it was EASY - depsite what the dope above says. Suggest you look carefully at partitions - l...
Summary: Its been a while since I played with the boot manager in Win2k, but if you right click on my computer, select properties and have a nosey around you w...
Summary: I was wrong assuming there were two partitions. It is maybe one partition two OSs - didn't see D: in DOS. Frankly, I don't remember what I did. I ...
Summary: I have a Dell Dimension XPS T500 (500 Mhz Pentium III/384 MB ram/20 GB HD (partitions 15 GB drive C and 5 GB drive D)) which is presently running well...
Summary: i am getting some problem in my out look express after upgrading it from 5.5 to 6. iam using win 2k OS with 512 mb ram and 2.4 p4 cpu.when i try to op...
Summary: Read posts 21665 (#5) and 21647 (#4); they both deal with dual-boot ('9x/W2K) - just substitute ME for '98. If you have W2K already installed (with a ...
Summary: I have P3 800 PC with 128 MB RAM, 20 Meg HD. The motherboard is GA-6VXE7+. The PC is assembled. I am having problems while upgrading the RAM (trying t...
Summary: Well, I know that, even if the bus is kept same-same, that OCing CPU's with two different sticks of memory usually makes systems unstable. I remember ...
Summary: Hi, Can someone please help? I have a dual boot system: Win2k on 1 hard drive as NTFS and Win98 on a different hard drive FAT32. When installing my v...
Summary: Hey guys, I recently upgraded from WinME to Win2k. I left it as a dual boot system for now, with Win2k installed into a seperate directory. My problem...
Summary: I have Celeron 333, 64 MB RAM and harddisk 8,4 GB. I use Windows98 and Windows 2000 Prof. together with dual boot. If, for one reason, I have to rei...
Summary: Hello: I am hoping that I can get some help from everyone here in this community. I am a graduate student in bioinformatics and I have realized that ...
Summary: my dual cpu comp.{ PII 400 ,iwill (dbs100) MotherB +256 MB ram } work very slow . if i make the comp. work with one cpu every thing work very good...
Summary: Hello together, after I installed aspi!.exe to get my ripping software working, W2K does not boot completely. The GUI-like starting screen is visible,...
Summary: Try again - last reply bombed! 1. If 98 installed on drive while in another PC, might not boot in new PC (drivers). If old machine still available, tr...
Summary: You can install W98 first, I have just done it with ME, but it is more complicated since W98 overwrites the bootfiles and this makes dual boot impossi...
Summary: People are having problems getting Windows 2000 back after a boot failure. If you install Windows 98 over Window 2000 you will lose the dual boot feat...
Summary: you need to partion your hd and install win98 first then win 2000 you can only dual boot o/s systems with fat system on the active partion. you can no...
Summary: Boot into true DOS mode and type fdisk /mbr Now reboot and the loader should be gone. Now go into folder options and chose view and check the show hi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
