Summary: I've got a 3com nic and i'm running solaris8. Whenever i try to use ifconfig to setup my nic it says elx is a bad file number. I cannot get solaris to...
Summary: I am fairly new to Linux. I am running Mandrake 7.1. I have a 3com 3c905c nic. Under adapter 1, I setup dhcp, eth0, and am trying to use the 3c59x k...
Summary: I had a similar prob with a Compaq onboard card. Try removing the NIC with the software admin and remove the TCP. Rebuilt the kernel and then re-int...
Summary: I have 2 Hard drives on a PII 450, 192 MB RAM. A. 13GB - Solaris8 B. 27GB - NT 4.0 How do I get dual boot on the fly ? At the moment, I disconnect on...
Summary: I did a fresh install on ULTRA5 with solaris8 & after the install I lost the Mouse?? Need help ?? See below my DMESG screen Info: Oct 31 08:00:19 unk...
Summary: I am new here, so I need help. I have dsl internet service connect to the hub and I want to set up my solaris 8 box to directly connect to the Interne...
Summary: I have the solution!!! Linux wasn't telling the truth when the drivers were loaded. It appeared that the drivers were loaded perfectly.... I thoug...
Summary: I want to configure two NICs with the same IP address.For this i want to use the Netrain utility.How do i download it?and how do i configure the two N...
Summary: My m8 has just given me an ibm604e unix box with aix unix installed. problem is how do i communicate with this thing ( i'm running xp) can i talk to i...
Summary: Sorry about the previous verbage. Some how gets lost in the translation. >>>u are interested to browse the internet from your Solaris machine. Yes...
Summary: I want the driver of the network adapters for win98 : 3com 3c920 integrated fast ethernet controller(3C905C-TX compatible). With my beast regardes ...
Summary: I am an A+ and CNA certified technician familiar only with MS Operating Systems. I need to find out how to install a PCI NIC to a Unix machine. Can ...
Summary: Hello.. The problem , I am having is to install Solaris8 on a 60GB HD. I formatted using Linux since it wasn't possible to do it through the Solaris I...
Summary: I need to setup a mass email server on either linux or freebsd. I will only use X windows for admin, but when not admining x will be shut down. I wa...
Summary: I have a cable modem running fine off of my 3com ethernet card and have installed a Linksys card and compiled a new kernel that supports the new card ...
Summary: hi pl help me . how to dual boot solaris 2.7(intel) with win 98. my harddrive is 20 gb seagate , nic compex 10/100,motherboard intel 810 chipset. nan...
Summary: I managed to install Solaris 9.0 for x86 but unfortunately it did not pick up my NIC (linksys LNE100TX) My question comes in two parts and any sugge...
Summary: i don't know much about networking, but i have encountered a similar prob in the past with a 3Com Etherlink. I had configed it as full-duplex, but my ...
Summary: I am having a bit of a Problem, I have never done anything at all with UNIX and I need to build a UNIX Server by Wed for work, I have tried to find so...
Summary: Which driver is used for the NE2000 PCI NIC? The card is installed on a box loaded with Mandrake 7.0. It isn't mine, belongs to a guy half way around ...
Summary: I am very new to linux/unix. I am trying to setup a network LAN with 2 computers. One of them is Win2000 dual booted with linux and the other is a Spa...
Summary: in Linux, non-standard NICs seem to detect as NE2000. If you know the port and IRQ, you should be fine. Granted, your access might be a bit slower t...
Summary: Does anyone know where I could get the driver for 3COM 3C905B-TX Fast Etherlink 10/100 NIC for Sun Solaris 2.6 x86 Platform? I already searched the 3C...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
