Summary: 1) Does OS\2 use Windows 3.1 / DOS NDis drivers? 2)If not, anyone know where I can get a driver for my card. I dont see any on 3Com's site nor do I se...
Summary: Sorry, meant to get back to this quicker. I was able to install and get past the reboot and into the setup. Seems like everything was self-explainato...
Summary: Eric, I GENERALLY agree with previous response but I KNOW that HDD requirements given are LOW. Try 80MB *min.* for ver.3; 120MB *min.* for ver.4. Also...
Summary: Hi folks, I've run into a rather annoying issue. I have a good system to run os/2 on that can't really be used for much else at the moment, and I get ...
Summary: I have searched every where for intel 82365sl pcmcia driver. Does anyone out there have a copy or know where i can get one. I have a ti extensa 600cd ...
Summary: I recently set up Warp Version 3 on an older PC for kicks; I had the PC, the OS/2 software, why not? Unfortunately, I cannot get the 3C509b-TPO NIC in...
Summary: Just been through this myself, only with a different PCMCIA NIC card. First you need to download and install the latest PCMCIA drivers from IBM'...
Summary: I can't seem to find any drivers for the 3Com PCI NIC Model 3C905b-TX 10/100. I only seem to find 3c509B drivers but that card is no longer made. Does...
Summary: A week ago I upgraded the BIOS on my Toshiba 435cds laptop from v6.3 to v6.5. Now my PCMCIA modems (Megahertz XJ1560 & XJ2288) don't work altho the Ad...
Summary: I cannot get my IBM T22 Thinkpad 2647 to work with its integral PCMCIA modem (Intel PRO/100SP Mobile combo adapter, identified in Windows as a Lucent...
Summary: Dear, Hmmm, I'm using a 3Com 905B-TX Fast Etherlink XL PCI card and the resp. drivers that I downloaded from their site. When I boot up OS/2 it states...
Summary: You can use any HPLJ driver from OS/2 to make this machine print. If you use the driver for the HPLJ III, you will only get 300 dpi. Just pick one o...
Summary: I have a UMax ActionBook 300T I am thinking of installing OS/2 Warp 4 on. The only important driver I cannot find is for the Xircom RealPort 56 (rm56...
Summary: First off, im not an OS/2 person at all... Mainly Linux, Unix, Windows. I have been given the task to hook up a printer to a parallel port on a older ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
