Summary: I can't seem to find any drivers for the 3Com PCI NIC Model 3C905b-TX 10/100. I only seem to find 3c509B drivers but that card is no longer made. Does...
Summary: nevermind, I found it. I dont know why 3Com doesnt have it. anyone in need of a Nic driver for Warp 3, look at http://www.juge.com/bbs/Os2.Html Im no...
Summary: The Device Driver Install (ddinstal) is just for 'normal' drivers. NIC drivers and protocols are setup with MPTS (type mpts on command line or use the...
Summary: i just installed os2 v3.0 on one of my pc's (dell Gs+). Where can I get drivers for the 3com NIC card that is in it. After I install the card will I...
Summary: Sorry I'm late to the party. Anytime I get that err, is that either my cable wasn't detected or the card died. Try the following: Remove the NIC from ...
Summary: I need a NIC driver for a WinBond ISA 10mbps nic, chipset W89C905. I have a config util and the card is there and working, but I can't get OS/2 to pic...
Summary: I decided to try a fresh install again. I swapped the rage card for a riva tnt. IMO those older ati cards are crap and it was causing unique frustra...
Summary: Found this: Easy networking with OS/2 Yes, it's even easier than you thought! Networking OS/2 isn't black magic like many people think. It has the sam...
Summary: Found this while trying to solve the same problem. Easy networking with OS/2 Yes, it's even easier than you thought! Networking OS/2 isn't black magic...
Summary: I'll answer my own question. "Easy networking with OS/2 Yes, it's even easier than you thought! Networking OS/2 isn't black magic like many people thi...
Summary: Dear friends, I am triying install a network interface card (3com 3c509B) on os2 warp and dont have the driver correct, somebody can help me please. M...
Summary: Yes, It works !! Looks like the Slot ID parameter in MPTS is not that important or required. Just have to load the right NIC driver and the NIC "Pings...
Summary: Well, I solved my problem and I am responding to my own query: 1). Make a diskcopy of the Disk #1 from the OS/2 install set. (Disk #1 is the 2nd disk)...
Summary: YES!! :D But now, ANOTHER problem... :S I'm following the instructions on: http://www.jacco2.dds.nl/freetcp.html#install But I get stuck on Step #8......
Summary: (I hope I don't jinx myself) I determined it was IRQ and PCI cards. Odd that there were no reports of problems, with Hardware manager nor boot up. I r...
Summary: Thanks so much for your reply - those NIC drivers work great (so far). I got the NIC set up properly and I can ping myself but I cannot see anything ...
Summary: I recently set up Warp Version 3 on an older PC for kicks; I had the PC, the OS/2 software, why not? Unfortunately, I cannot get the 3C509b-TPO NIC in...
Summary: I downloaded 3C509x2.exe but cannot figure out how to install it on OS2 3.0 Warp. I extracted the file under /OS2/3com and ran INSTALL.exe but that ju...
Summary: How do you install this NIC on these systems? It says it cant find the drivers on the floppy no matter how I organize them? I am using intels drivers ...
Summary: Need help getting my NIC working. Toshiba 445CDX 48m RAM 2.1gig HD WARP 4 Fixpac 14 Dan Boucher At boot I am getting (close as I had to copy it all to...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
