Summary: A freeze dryer at work uses windows for workgroups 3.11 and the app won't run on anything else. The computer died. Tried to fix it and finally paid...
Summary: my friend just bought an old 486. how can I install dos and win 3.11 on his hard drive when his hard drive is connected to my computer? I'm running wi...
Summary: i have wfw 3.11 on my hard drive, but when i copy it onto floppy disks, disk 6 always comes up with an error about half way through and won't finish c...
Summary: i am using ver 6.0 dos. i am unable to install windows 3.11 to my hard drive (c:), i only have the 1 hard drive and have no option to install else whe...
Summary: With your P90, the BIOS will be modern enough so that once the new drive is properly installed, start the computer, enter your BIOS and it should auto...
Summary: Nero is very friendly to use and makes both "floppy emulation" (loads simulated boot floppy first) and "hard disk emulation" bootable CDs easily. They...
Summary: Ok, it has not worked. I have tried all the input on this forum, for which i much appreciate but i see only one solution. That is to reformat the hard...
Summary: I recently purchased a Pentium 133 board and chip so I can upgrade my brothers crappy 486. Anyways..I put in the board and it seems to be running fine...
Summary: hello there!!! maybe your hardrive don't have the operating system inside... maybe it got deleted when you formatted... those files are command.com an...
Summary: even if you added a second card to your pc you could not run 3 or 4 ide hard drives because the bios has support / settings for only 2 ide devices. ...
Summary: I recently tried to upgrade from win3.1 to 3.11 on a compressed drive. I ran into problems with the drive unable to mount. I solved this problem, but ...
Summary: Dear whomever: I cannot install 3.1 right.The hard drive has 5.0 dos installed recently. Everytime i install windows it says cannot read A drive re...
Summary: If you REALLY want win 3.1 on your computer with a second hard drive, i suggest that you back-up a copy of win 3.1 or 3.11 setup and setup files onto ...
Summary: the only thing is I was stupid enough to fall for this 2 times so I know it isnt the hard drive. What else could cause a problem like that, ...
Summary: I have an old 486sx running win 3.11 & dos 6.22, no internal cdrom or network card. I do have an external cd drive, how do I make 3.11 see the externa...
Summary: You have this drive compressed don't you. When you use Drive Space it creates a drive known as H: this has the boot files on it and it the acutall si...
Summary: Thanks for that! Let me get this right! i buy a new drive, and install it, then install Dos to it, then from there install 3.11 to the same drive. the...
Summary: I have an older Gateway 2000 that is currently running windows 98. I have some older CAD software that is 16bit based and won't work properly on newer...
Summary: i have a zenith 386/20 upgraded to 486 w/win.3.11. 73 meg hard drive,20mhz 16 meg memory recognized,125 compressed hard drive version 2.10.i lost my s...
Summary: I am getting rid of an old computer running Win 3.11. I want to clean out all personal info from the hard drive first. How do I do it? Thanks. ...
Summary: I'm trying to improve (upgrade is too strong a word) a Tandy 386 for a friend. I put a slave 512 mb in with the existing 322. I had to reformat it t...
Summary: I would like to install a new hard drive in my old 486dx running windows 3.11 and i have come to a grinding halt. I inserted the 2nd hard drive into t...
Summary: I am using a Packard Bell Legend 486DX -33MHZ box with 36 MB RAM. I installed a second hard drive several months back and it has been running great. ...
Summary: My system is (don't laugh!) mongrel 486 PC with Award BIOS, 2x500MB hard drives, 16MB RAM, Windows 3.10 (that's what Winver sys) for Workgroups. I als...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
