Summary: hi, i hope there are a lot of smart people out there, because i am stumped! currently have single 6.4G hard drive, partitioned into 4 logical drives[c...
Summary: I have win 95 with a second hard drive as master on secondary port and cd rom as slave on secondary. I.e second hard drive was drive D, CD was E Prob...
Summary: .....only if a password is provided. For example, under Win 98 in explorer if I were to click on the new hard drive (D:) then I want to be restricted ...
Summary: Hello, I am running windows XP on an HP pavillion 750n..I went and bought a 2nd hard drive today and I want to install Win98 on this one..How do I go...
Summary: My hard drive (win 98) failed to boot. I tried to reinstall win 98, not successful with the message "there's no hard drive or hard drive not recognize...
Summary: I have added a 2nd hard drive. Both cables are firmly seated. I set the second hard drive to auto in the bios. The jumper is primary slave. When I boo...
Summary: Allright guys, I know you have a solution for this one... First, I would like to give the specifications of my computer, for future misunderstandings...
Summary: as i stated before, i have windows 98 on my current c: drive. yesterday i installed an additional hard drive and partitioned it into 2 drives, d: and...
Summary: I have installed a 2nd hard drive. It was from an old pc. I don't want to boot to it, just recover some old data.I have made the cmos changes and it i...
Summary: I just added a 2nd hard drive from my old computer to this one, calling it my D drive. I want to format it. But when I right click and choose "format"...
Summary: I have 2 hard drives, C and D. D drive is not to be found suddenly. It was working fine for almost 6mos. I didn't install any new programs, made adjus...
Summary: hey, I want to install my 2nd hard drive on my computer, I just forget how to do it, I know all the jumper settings and how to set it all up physicall...
Summary: to bob. if i put the 2nd hard drive in as the slave to be used for a storage drive, how do i partition and format it? through windows or at the initia...
Summary: Hi, ive check all the post but couldnt find this here. I have an IBM aptiva that is running windows 98. The original hard drive is a 2 gig. I was g...
Summary: I installed a 2nd hard drive as a slave and my system recogized it on boot up, however, it doesn't show up in my computer or have a letter assigned to...
Summary: Hard drive not recognized after FDISK. Rebooted from floppy to check settings in BIOS. Setting for hard drive is AUTO, but shows "Primary IDE Master...
Summary: I have 2 hard drives, both of which i have used for a few months, successfully. I had a problem with my 2nd hard drive (drive D), which was making wi...
Summary: I was out of town a few days and just wanted to give thanks to those who responded to my post about my hard drive not being recognized. http://www.com...
Summary: I have added a 2nd hard drive. Both cables are firmly seated. I set the second hard drive to auto in the bios. The jumper is primary slave. When ...
Summary: I have a bog-standard Dell 300MHz Pentium II with an 8GB hard drive (IBM Deskstar) (bought Jan 1999). I was running out of space, so I went out and b...
Summary: I've just installed the 2nd hard drive on the secondary IDE cable and the primary on the primary IDE w/CD-ROM as slave. Problem is the secondary Mas...
Summary: hello, just installed 2nd hard drive, when my computer boots up, it reconizes both drives but even thought I double checked the jumpers it is reconizi...
Summary: I too am just begining to install a 2nd hard drive i was thinking of the Seagate U8 8.4gb to install my first hd (master?) is a 4gb ...made by?.how d...
Summary: just fitted 2nd hard drive hopefully as per instructions,all works well except one of drives keeps stop starting and stops actions/cursor working for ...
Summary: I have a win98 machine with 32mb ram and 266mhz Pentium2. I had a 4gb hd but replaced it with a brand new 20gb hd, I booted the machine with win98 cd ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
