Summary: hi, i have a compaq computer that i bought not too long ago, and i want to upgrade the video card in it. it's a pci-express board, so i went and order...
Summary: Thanks for the input, gonna check it when I get home... (a bit more information: the new PSU is designed for use with a P4 (has the 4 pin connector), ...
Summary: Only the 20 pin power connector. After all where would you plug the 12v connector to on the motherboard? Only do what the motherboard docs say to do...
Summary: I have the A8N-SLI Dekuxe myself with a 380W Tagan PSU with 20pin ATX connector. I also use a 20 to 24 pin adapter and it works without problems. Just...
Summary: hi all. i posted here a couple days ago about building a wooden case machine, and i got lucky: a friend of ming sold me his hp slimline machine for su...
Summary: The added 4-pins on the main ATX connector are used for the 75W requirements of the PCI-E slot. You *should* be able to use the 20-pin PSU in the 24-p...
Summary: The power supply is an ATX supply with 1 connector. Both boards don't have that extra power connector either. If Jesus [God] Himself said in the Bibl...
Summary: One way of doing it would be to go to Newegg's site & choose a motherboard...then bring up the page for that board. On the left, you'll see a pic of t...
Summary: S775 like yours need an ATX2 PSU which has a 24pin connector. You're trying to connect a 20pin ATX PSU. I'm not sure if you can use a connector like ...
Summary: i just got a dfi lanparty ultra-d and a geforce 7800gt all put together with an ocz moddstream 520W for some reason the computer is doing rolling rest...
Summary: Thinking of selling this on Ebay. For the life of me I cannot find a name on it. Socket 370 Intel 902 mhz Award Bios Board model 8601 (A) 686 Has both...
Summary: Firstly, I haven't installed any OS yet. I am trying to run in minimal configuration first. I checked my PSU and its 17A on the 12V rail. I have insta...
Summary: Yes. Go out and buy a good quality ATX2 compliant powersupply. Look for one that has dual 12V+ rails rated at 20A on each. I believe there are adaptor...
Summary: Replacing PSU. Cant get the main power connector off the board. Appreciate that I should be pressing down on the lever on the side and pulling. Howeve...
Summary: Hi. We have acquired a micro 'ATX' Intel chipset motherboard with a non-standard power connector. It has only 6 connections in a 3x2 layout (looks li...
Summary: Many more recent PSs have the capability to connect to a 24 or a 20 position connector on the mboard. The connector from the PS is often in two pieces...
Summary: I am replacing my current psu (300w) with a 500w psu. The motherboard has the ability to accept the 24 pin atx connector, however the original psu had...
Summary: Here's the list of available plugs on your BFG 650W: 1 - 20+4 pin main ATX 2 - 4-pin ATV12V (CPU/motherboard) 4 - SATA 6 - 4-pin molex (for IDE HDD/op...
Summary: Well, if it is the right size, FIT IT! It will be an ATX at 300 watt. And your motherboard will probably have an ATX connector as it is a P3 board. Ju...
Summary: Hmmm, I'd say that, no, a PCI card can't draw than kind of current. I've installed the same card and it worked fine, but it could be a dud that locked...
Summary: Look closly at the 24 pin connector on your power supply. There is an area at one end that separates into a four pin connector . Unhook the 4 pin co...
Summary: If you could offer any advice with my problem I would be most appreciative. My problem is that the board will not post. All fans and LEDs turn on but ...
Summary: I have a very intersting problem...when i switch on my pc, and if i just move the case slightly my pc will hang, it will just freeze no mouse or k/b w...
Summary: I want to take my old Pentium machine and while keeping the existing case that is equipped with a standard 20 pin ATX power connector/supply, replace ...
Summary: Just be aware there are a number of different configurations and you need to ensure the PSU you get will have the right connectors. ATX old style has ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
