Summary: Problem: The full capacity of EIDE drives larger than 137GB (128GB binary) is not recognized in Windows 2000/XP. Cause: The Windows Operating System, ...
Summary: Yep - I know the 250gb drive I have in my tower runs off the contoller card. What I'm not sure about is putting another 250 in one of my Firewire exte...
Summary: My new HD, Maxtor 6 Y200P0, a 200GB HD is recognized in BIOS and WIN Xp Pro as a 31GB HD drive. I tried Maxtors utilities and that "large drive suppo...
Summary: Hi, I'd try the bios update first but I'm not sure the newest bios is able to support 15GB drives. That depends very much on the service of the manufa...
Summary: WinXP requires SP1 for large drive support. If the motherboard doesn't support 48bitLBA, you can add a PCI controller card that will (if you have a fr...
Summary: Trying to locate a DVDRW drive supported by Win98 with 300MHz PII processor and 192MB RAM. Does anyone know of one? Thank you in advance, Joe ...
Summary: I found this can you tell me if this is on the right track. http://www.dellcommunity.com/suppor... The only way to do that is with the OEM Sysprep uti...
Summary: hi i'm trying to add an IDE Seagate Barracuda 7200.8 200gb hard drive into my pc when i put it in my pc and then my pc will not load up and i do not k...
Summary: If you enabled large drive support, you have the right FDISK. There is some partitioning problem involved. What does FDISK 4 (information) say?...
Summary: ryan, boot sequence, HDD, Floppy, then CDROM can't find boot sequence in HDD, had to boot from floppy or CDROM... i previously didn't have this proble...
Summary: First, does your W95 qualify as version "B" or higher? An easy, but not foolproof way to see this, does the datestamp on any of the .cab (installation...
Summary: If your hard drive is not new out of box, With a win 98 startup disk in floppy drive and with bios set to boot from floppy, restart pc and at the "A" ...
Summary: Did you answer YES to enable large drive support when you started FDISK? Otherwise you utility/boot floppy may have an old version of FDISK. ...
Summary: I was recently given a HP Pavilion 6623, when I first turned it on it had a stock install of Windows 98SE, but it was very cluttered and broken, so I...
Summary: The only thing to add to what Francis has told you is: If you are using the FAT32 file system, answer Y (yes) to large drive support. ================...
Summary: from your other post: "And who can tell me about the latest video card that is supported by Windows 95 (OSR 2.5)?" If that's the version you're using,...
Summary: seen a nice maxtor 300gb drive on play ive noticed with 2k pro dont support drives over 160gb or somet cus i got a 200gb in but after installing 2k it...
Summary: I understand the process to enable large (>137 GB) EIDE hard-drive support in XP. Is the process the same when dealing with a SATA hard-drive? Or does...
Summary: I'm looking to upgrade my hard drive, I'm thinking about getting a maxtor 200 gb hard drive to replace my maxtor 6E040L0 40 gb hard drive. They're bot...
Summary: Look to see if there are any BIOS upgrades available on the Emachines site. Descriptions of what the BIOS upgrade will change are usually available. ...
Summary: As far as I know, it can't be the hard drive size limit. Do you know if your bios can support 20 gigs of hard drive space? During fdisk is there an o...
Summary: What you probably did is not enabled large disk support (i.e. you are using FAT16 not FAT32). Under FAT16 you can create 2.0GB partitions. When you ...
Summary: Take a look at Asus' site. The SATA ports on your motherboard are first generation SATA 150. I don't think you'd have any problems with SATA II driv...
Summary: Another comment instead of a large drive whynot have the computers download from a server. LTSP - Linux Terminal Server Project. I have seen a setup...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
