Summary: I have two routers. (1) wireless linksys (2) hardwire netgear. I have been trying to setup my network to work with both of these routers on the same ...
Summary: Is it possible to use 2 routers on on line. One router plugged in downstairs in a BT Socket and 1 plugged in upstairs to another phone socket? ...
Summary: So i have a Linksys Wireless Router setup, works fine. Now on the other side of the house I have a computer that I need to put on the network. However...
Summary: You won't be able to do with without two routers which seems a waste after the vpn/firewall. But you can do it and heres how 2 routers go into switch ...
Summary: I am trying to set up a win 2000 server with 2 win 2000 pro clients. I have an internet connection coming into the house with a cable modem, the modem...
Summary: Brief description:- we have 2 companys both with there own NT4 servers and IP addresses. They are linked via a 128k lease line with a router at each ...
Summary: Hello, I was hoping you could help me with this: Me and my neighbor, who lives about 100meters from me, are sharing a connection with 2 AP and my rout...
Summary: I am trying to design a workable network with the following components: (I will group the components as they are situated in different rooms/floors) G...
Summary: I have my home wired for DSL (AT&T). In the process there were two locations that DSL connection was installed. I have always only used on of these ...
Summary: ok heres my project. I am trying to setup a wireless bridge between 2 LANs. Each house has a cable modem, and a linksys router, plus some computers on...
Summary: Hi Experts We are in the process of merging are voice and data networks and unfortunately I am getting conflicting advice from our network support guy...
Summary: The only aspect that is working is the internet connection, which would lead one to believe that there is bidirectional communication on the Linksys s...
Summary: You say wireless access point? I ask because when I log onto my crappy soyo aerilink wireless router, I have the option on using the device as a wire...
Summary: I've added a wireless router (which has WAN port and 3 additional ports) to an existing 3 desktop pc network that's connected with a router/4-port swi...
Summary: Hi I tried looking for similar posts to mine and I'm sure there are some but I can't find any so I am going to post one of my own. Well I have two Net...
Summary: Hi, I currently have a D-Link DI-704P ethernet router and 3 PC's hooked up to it sharing a broadband gateway. I also have a laptop with a D-Link wire...
Summary: i have 2 nic's on 1 pc, one for local lan and another for wireless internet, the problem is when i browse my local lan the request goes to internet an...
Summary: Hi, I have a D-Link DI-713P which is connected to a Lexmark Z52 printer. I have a seperate wireless router Linksys WRT54G which is conncetd to a cable...
Summary: Looks good so far. In terms of "not being able to hook to routers together", that is wrong. You can certainly hook two routers together. However, g...
Summary: I can't find my router on the network. My router is a Linksys BEFSR41 4-ports. I did delete my DHCP configuration on my router and now i can't find ...
Summary: Im trying to figure out how to have 2 routers on the same network with different subnets talk to each other. One router linksys is set to 255.255.255....
Summary: Basically I want different router firewall settings so I can choose to connect computers to either depending the level of security I want. Ideally we ...
Summary: Hi! I havbe 2 computers on a network one running xp hom and the other xp pro I would lke o be able to have each computer have like a name instead of ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
