Summary: Hi i have 2 computers connected with a cross over cable both running NT 4.0. Both of the computers can see themselves in network neighbourhood but no...
Summary: Hello everybody. I administrate small computer network - 30 computers.Mostly Win98 and 2 WinXP. I have a server - PDC Windows NT 4 sp 6a. The problems...
Summary: Here's my setup: I have 2 computers on a LAN which meet at a belkin 4 port router. the router then connects to my cable modem. One computer is running...
Summary: Hi there Its taken me 16 hours so far to figure out how to set up a peer-to-peer (via a hub)network at home but i'm wondering if is it possible for me...
Summary: I have two computers, one is running win 98 and win2000 it is a p200mmx machine, and another one is running win 95 it is a 486 machine. I setup a netw...
Summary: Hey, it sounds like you know what your doing. But you need to add the routes to the other servers in the Gateway's static routing table using the rout...
Summary: I am in an office environment that has 2 computers both running Windows NT 4.0. We cannot upgrade for 4.0 due to current software needed to operate o...
Summary: We are facing some networking problems. Our Network connection has two segments one is connected by thin ethernet cable with 10 no of nodes. this segm...
Summary: Changed from hosting over T1 and using that as web connection to cable modem. Lan is 2 computer network of NT 4.0 servers. Cable modem was initially...
Summary: We are facing some networking problems. We have total four Hubs to communicate between the server and different nodes.When we start to process any dat...
Summary: We have a strange network problem on our LAN. At certain times (randomly) our network clients seem to lose their network connection to a server, when...
Summary: I have setup Windows NT Server 4.0 with SP4 on one machine on a small three computer network. The client machines are using Windows 98, and are sucess...
Summary: Hey, I have 2 computers networked together via ethernet. The other one is using NT 4.0 (service pack 6) and has an ISDN internet connection. The othe...
Summary: using an old 486 and p100 to make a simple 2 computer network 486 has ntserver 4.0 installed. Can,t seem to get 3c905b card to work tryed drivers from...
Summary: Hi! I have 2 Windows NT computer networked together. One computer has all the data I need, and I want to link it to a folder in the second computer....
Summary: I have an nt server and two computers and a cable modem connection. If I use DHCP to obtain ip addresses then i can get on the internet but i can't s...
Summary: We run Small Business Server under NT 4.1 actually only to run SQL Server 7. We connect several Win 98 clients to this with no problems. What we wan...
Summary: We have 15-20 mixed 95/98 workstations which send and receive email through a mailserver. We have had to replace the mailserver with an NT 4 workstati...
Summary: I have this weird problem with dial up networking that microsoft can't even figure out. When I go to set up my internet account I get an error that sa...
Summary: hi all, we have a LAN of about 20 machines, 2 of which use win2K. The problem is that the win2K boxes become unavailable on the network and the networ...
Summary: Dear i am facing problem regarding to MS-proxy 2.0 (SP1 Installed). Situation is this that We have a Windows NT 4.0 (Sp6 installed) as a proxy server...
Summary: i am having net work of 9 computers.my problem is that athe network speed is very slow and if i ant ot move or copy a simple of 2 mb data i will have ...
Summary: OK... We are running a Windows NT 4.0 Server with about 8-10 computers logging in (Mostly windows 98 Users). Never have had a problem before, but all...
Summary: Hi, I have a computer with three network cards. Two of those are connected to a TCP\IP switch. I have installed the driver and set up the network...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
