Summary: Okay my school gave me an extra hard drive and iam not sure what they had on it but thats not whats wrong, i hooked it up so that IDE1 connects to my ...
Summary: I have 2 hard drives in my system. One is a 14 gig and the other a 3.5 gig. When I partitioned the 14 gig, DOS is only showing it as an 8 gig. Wher...
Summary: Currently I have 2 primary partitions on 1 hard drive and it's been causing me problems. the 2nd primary partition has all the mp3s and video files I...
Summary: I have an old IBM ps/2 computer. An 80286 10 mhz with a 30m hard drive. I am thinking of putting a bigger hard drive in. It has the original one in it...
Summary: I have a Fujitsu Monte Carlo Pentium 133Mhz Notebook with no hard drive and no original setup disks. Can I just go out and buy any 2.5 inch hard driv...
Summary: Would like recommendations or pointers to tutorials for installing DOS 6.2 to a clean hard drive or even installing it over DOS 3.4/Win 3.1 Thanks!...
Summary: Hello. I've tried installing a WD Caviar 21200 hard drive (1.2 Meg) on an Asus VX-97 Motherboard with a P166MMX chip on it and 32Meg Ram. Now, the mot...
Summary: I tried all the above with no luck. When I tried A:\Fdisk /MBR after 30sec it cam back with " The master boot code has NOT been updated" and returnes ...
Summary: It's not recognizing the hard drive probably because you didn't set the cd-rom to a slave on the IDE channel. To do this, open the case and look on th...
Summary: Sounds to me like you may ahve a real problem.... If you didnt back up your files your OUT...If you have the operating system (i.e. windows, os/2, uni...
Summary: I am having a problem trying to run Fdisk. It allowed me to delete the old dos partition. When I tried to create a new one the computer froze. It neve...
Summary: The problem is this, although the phoenix BIOS sees the harddrive DOS does not. I have had this problem with 2 computers before, a gateway 2000 and th...
Summary: WARNING: You will lose ALL data on your hard drive if you start messing with 'FDisk'. In 'FDisk' delete all partitions. They must be deleted in the ...
Summary: I have a small (Maxtor) hard drive that has 120 Mega bytes. It currently has Windows 95 on it. I have pulled it out of the computer that is a 486 DX 3...
Summary: We have a 686 cerix, we removed 1.19 hard drive and installed a 4.3 hard drive using the p and p and we can only use 2.0 of new hard drive because u...
Summary: its a 1.4gig hard drive, btw. and FDISK from DOS6.2 can't "see" win98 partitions, you need a newer FDISK -> try www.aefdisk.com (if you're used to com...
Summary: 1. run the fdisk.exe program 2. If it asks if you want large disk support, press the y key for yes 3. Create a DOS primary partition, using 100% of...
Summary: Hi, Boot from Win95 startup disk and try to run Scandisk on C: drive. In some cases it could be able to restore lost partition. (Or better try to use ...
Summary: hello i need help i have a ibm ps/2 70386 hard drive parked i dont no wath is the fonction to depark hard drive and i dont have any disk why this fonc...
Summary: I have an old 386 with only 30mb hard drive running dos 6.2 and win 3.1. I need to free up another 2mb for a program i want to install. Have al...
Summary: The hard drive is definitely bad. I had a hard drive in my computer that would click, cry & whine. Scandisk/Nuts & bolts utilities could do nothing wi...
Summary: I’m up grading a 486dx2 and a Quantum Hard Drive I’m having trouble with fdisk (maybe?) and formatting the Hard Drive. I ran fdisk with a win95 boot d...
Summary: I have dos 6.22 installed on a 10 gig hard drive which is partitioned off so I can use all of the hard drive. What do you people mean it wont install ...
Summary: I have 2 386's and I decided to take the hard drive from one and put it on the other (so then it would have 2) I did that and plugged in all the cable...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
