Summary: Can someone please help me out? I'm trying to get into my router config settings but for some reason http://192.168.1.1 is not connecting. This has ne...
Summary: Please can someone help? I can not connect via browser to my router @ 192.168.1.1. Have tried everything – swapped cables, set static IP, etc., etc....
Summary: Hello everybody! I need your help! I have a westell 327w (wireless router and gateway) versalink, from verizon, connected to my desktop via ethernet, ...
Summary: Create an account on the target PC (192.168.1.2) using the exact same username and password used on the PC you will be connecting with. If that doesn'...
Summary: Hi all, can u help me?. my prb : I can connect to internet but can't connect my roulter ( 192.168.1.1). I can ping 192.168.1.1 form dos. How to connn...
Summary: I have installed a wrg45g pci card on a comp with a new install of xp I had to download the Ralink drivers as the Linksys drivers caused a BSOD docume...
Summary: A few days my wireless connection on my computer stopped working. It is saying limited or no connectivety. We have a linksys router with: 1 desktop h...
Summary: I am new to networking and have just setup a Asus 520g wireless router, both computers say that the connection is good but I cant actually see any fil...
Summary: Hi all. Probably a simple answer to this simple question, but if I were to run 2 IP ranges on one network i.e. 192.168.1.* and 192.168.2.*, how would ...
Summary: Hi All Does anyone know if it is possible to use the 192.168.1.0 address range using win98 ICS? It usually forces 192.168.0.0, I am curious if anyon...
Summary: ok wen i log on to 192.168.1.1 i log in to: user: admin pass:password and go to this link to c wat happned http://img236.imageshack.us/img236/... ...
Summary: I have tried to use the ping 192.168.1.1 but when I use the cmd command it shows the ip address as 192.168.2.1. how do I change the default ip address...
Summary: Hey, I really need help on this: I have 2 routers, first is connected directly into the net, 2nd router is D-Link DI-524 wireless and connects to the ...
Summary: I have a Linksys Wireless-B Router, Model BEFW11S4, and I am trying to connect to the internet via my Laptop's wireless card. My wired computers work ...
Summary: Hi, I am unable to connect to my Netgear router at http://192.168.0.1 When prompted to enter username and password, I enter 'admin' and 'password', bu...
Summary: Use the control panel for internet options, connections, lan settings. If using another browser see how to setup proxy settings. Use the ICS IP addres...
Summary: Ok just to make sure I have it correctly. Desktop has 192.168.1.10. Laptop has 192.168.1.15 and the WAP has the IP of 192.168.1.251. The WAP is conne...
Summary: I am Trying to access a NAS Storage Drive from Work to Home for a backup I am using Backup4all with a FTP connection I have opened port 21 at Home Tic...
Summary: The cable company just replaced our very old cable modem with a new much smaller little b---tard. Now the router no longer assigns 192.168.1.x IP addr...
Summary: JIMMY, 1. ask your isp if they do MAC filtering, which means if they do they will need the new mac address of your nic card 2 if not, then hold reset ...
Summary: We have Installed Wireless Lan as mention Below 1. Senao 30544 used as a bridge to connect two building 2. both AP(used as bridge given the follo...
Summary: The issue: I can not connect to wireless router anymore. I can not access 192.168.1.1 via internet When I ping 192.168.1.1 - it indicates the request ...
Summary: I have 3 computers in a network (hub, cables, Ethernet cards). Host (A) and one client (B) runs on Windows ME, client (C) on Windows XP. Host has an i...
Summary: Hi, my dad just bought a brand new Toshiba A135 laptop from the U.S. We live in Canada. However it does not connect to our wireless home network. I kn...
Summary: Hi, I have a Netgear 10/100 Router, which the ip is 192.168.0.1 with dsl running in to it. Now, everything about the internet works fine on the networ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
