Summary: IMO, running a K6-2+ or K6-3 on a 83mhz FSB motherboard is a waste of a good processor. And don't expect much success beyond say, 112-115mhz on a supe...
Summary: NOOOOOOOOOOOOOO!! A dead Super Socket 7 board! 8'( too bad, socket 7 systems rock. It's a pitty that both M/B and CPU are dead. Hard luck. Mattwizz3 ...
Summary: the pentium 233 does NOT come close to the AMD k6-2 400. the 400 is much much faster. All you need then is a super socket 7 motherboard to run the ...
Summary: AMD K6-2 uses lower power than Pentium MMX so you need a little converter (to Super Socket 7) if you can´t chance volt on the motherboard. Check out h...
Summary: The K6-2+/III+ CPUs are designed for a 100MHz FSB but can also run on a lower busspeed. Because the maximum multiplier for these CPUs is 6, you are li...
Summary: Your best bet is to look at computer markets, second hand stores and places like e-bay... but I dont like e-bay, the first ting I ever baught was bur...
Summary: Hi. This may sound like a very stupid question, but I’m afraid I’m new to overclocking! I recently overclocked an AMD 166MMX socket 7 CPU to run as a ...
Summary: Actually it depends on if your board can do 100 fsb and how hi your multiplier can go. If you decide to overclock make sure you get a socket "a" heavy...
Summary: Now, I've seen slot-kits and other adapters and have used Evergreen and PowerLeap solutions in both my 486 and my PII-233 (now an AMD 5x86 and Celeron...
Summary: Hi there, i know im going to sound like a madman but i have an old p233mmx and an aopen ax59pro motherboard (super socket 7) this board support up to...
Summary: Not really. why even consider OCing suck an old CPU? If you are just trying out overclocking, just to see it, get a super socket 7 motherboard and, s...
Summary: AMD is focusing on performance, rather than raw clock speed. Performance is more important than raw clock speed. The number after the 'XP' refers to t...
Summary: I have a computer with a M598LMR motherboard. I don't know a lot about CPU compatiblity, but the motherboard manual says it's compatible with all Sock...
Summary: how low of a CPU can i get if i want 550mhz?? super socket 7 motherboard that supports 100mhz FSB and 5.5x multiplier; wish to use 550mhz of CPU speed...
Summary: There is no upgrade path as your k6-2 cpu is the fastest cpu made for socket 7, overclocking that cpu is very hard as the 550 was the difficult to ove...
Summary: Go to Ebay and go to socket 7 you can get a p266 for about $5.00 + shipping. or you could get a socket 7 k6-2 450 to 500 mhz cpu for about 20.00 + shi...
Summary: Is it possible to put an AMD K-6 Chip in my Socket 7 with an Intel chipset? If not, what is the fastest Pentium ever created? Will it run on the chips...
Summary: I have seen a lot of talk about compaq and the fact that right away everyone says that they are completly void of overclocking. I have an AMD k6-2+ 5...
Summary: Ok, Vision is definately a socket 7 - I had it apart to confirm that. The HP's processor voltage can be adjusted, but I'm going to call on my best fr...
Summary: The only mobos that could handle both Intel and AMD cpus, were the super socket 7 boards. After those, the boards were made for either Intel XOR AMD, ...
Summary: To make a long story short I need a heatsink for a socket 7 with no fan. Motherboard has no electric hook up for fan. I searched google and all I ca...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
