Summary: Hi tara: First make sure you have all the programs you want to re-install to Win 95 before trying upgrade. I never use upgrade OSs myself, better to u...
Summary: "what would you advise them to do to upgrade the machines with the least cost and the most advantage?" Get a socket 7 AT motherboard, Pentium 233MMX ...
Summary: I have a 486 IBM clone. MS-DOS 6.22, Win 3.1 with the Win95 Upgrade. Originally the Error messages said, Missing File C:\windows\system\VMM32\VNETBIO...
Summary: Time to upgrade, fella....last time I bought a Mr. Bios chip to hotrod a 486 it cost me $79. Get an FIC VA503+ motherboard, any AMD K6 CPU you can loc...
Summary: Some time ago Weinger start this topic amazing us with LFN, just to remember or add... Original Message Name: Wengier Date: September 21, 2003 at 19:...
Summary: The upgrade depends on a few things: 1.) Does your motherboard accept a Pentium style processor (write through Cache vs. write back cache) 2.) Is t...
Summary: Usually the bios updates are bootable floppies. Sometimes, you need to boot from a boot disk, and then swap them and run the command on the bios disk....
Summary: I recently bought a Zenith Data Systems Z-lite 320L laptop from a thrift store. I can plug it in and use it through the power from the disk drive as l...
Summary: A question and a suggestion, why not UPGRADE from 3.1 to a newer, better supported version of Windows? Even Windows NT 4 is more up to date than 3.1 a...
Summary: I need some advise about upgrade a Cyrix 468DLC CPU Chip. The CPU Chip is 40 Mhz. The slot is the same size as the chip. The slot size is 14x14 (count...
Summary: I have a friend who got an old Gateway cpu that has win 3.1. I have a win 95 disk that came with my old Acer cpu. Can I just put win 95 on and load it...
Summary: thomas--assuming you have the cpu/ram requirements, upgrade installations never seem to go as well as a full fdisk/format and new install. I would wi...
Summary: I add a maxtor 7213at hard drive to the ibm valuepoint 6384 L40. It works just fine. But when I upgrade the 486SX to 486DX2-66 (using its overdrive sl...
Summary: hey Z thanks for the response on my question i realy appreciate the help and your time on helping me with this. So if im understanding you correctly y...
Summary: If you can find it i'd suggest getting a little more ram to compensate for CPU. If you put on 95 do a custom install and don't install anything extr...
Summary: Hi there, I've upgraded some of my hardware (main board , CPU, hard drive) but not all of it. I still have an 8-bit Soundblaster, a 4x Acer CD-ROM an...
Summary: I have an AST Ascentia 800 N - yes I know . . . I'm a very lucky guy!- (with a bulky NiCAD battery). Upon booting it boots into DOS since this is a MS...
Summary: Hi Mr. Nice Guy: First make sure you have enough memory for Win 3.1 (4-8 meg minium), & also make sure you have at least a 120 meg hard drive (this wi...
Summary: Hi Dave the snake: Like I said before, you should look for a replacement 486 motherboard that you can re-use your CPU & memory (30 pin or 72 pin, make...
Summary: Hello!I'm also setting up a Zenith Laptop (Z-sport 420) with 4mb RAM. I tried word6.0 but it seems to be too heavy for the system.I'm searching word 2...
Summary: Hi Susan Gee: You posted below that you wanted to upgrade to Win 95, well you need to remove everything from your hard drive before installing Win 95 ...
Summary: MAN!! quite an undertaking First, are you sure your computer will actually RUN Winedoz98? You posted you're running 386, THAT one sure won't, what ar...
Summary: Hi Heres the deal. 486 20 mHz cpu ISA AT VGA Classic Bus Win 3.1 Stuck an evergreen upgrade 5x86 on it. The system seems to be booting because the po...
Summary: Windows 3.1 FAQ – Version 1.1 http://www.logicalsky.com/Windows31_FAQ.htm ********************************************* Windows 3.1 FAQ – Version 1.1 ...
Summary: Ayuda con Note Digital modelo CS450. Como puedo sacar el password de la Setup CMOS. He removido la bateria pero no funciona. No encuentro, ni ha...