Summary: I installed OS/2 Warp V3 on an old 270MB SCSI disk (plenty of space!) yet after the first 6 disks (when it tries to load the OS) I get an error "SYS0...
Summary: I have a IBM Personal Computer 350-P60 with SURE PATH BIOS on it. Every time I power on the computer, the following errors keep coming up. I have done...
Summary: I have format my harddisk for 2G and 4G. I also try to format C: to HPFS and FAT,both display the same error message:FDISK unsuccessful!! The installt...
Summary: So the username and password aren't at fault. However, did you check e.g. the volume labels of the voice mail system? - The "illegal" name or characte...
Summary: MMOS2 seems to be installed based on OS/2 Unleashed. The driver appears in rmview. All seems OK. Trying to play .MID or .WAV file gets chooser of sa...
Summary: I have an IBM NetVista. When I boot the computer I either get a 1762 Configuration Change, 162 Configuration Change, or 1780 Hard Disk Error, message...
Summary: everytime I try to boot os/2 1.0 or 2.1, from a boot disk, it gives me this error: trap 0000 a bunch of memory dumps The system detected an internal p...
Summary: I have a really big problem with installing OS/2 onto a new soyo laptop. (External CD in IDE and floppy on parallel port). On install frst disk is ok ...
Summary: Hi all, I have PIII processor with 1ghz speed and intel 810e (his) motherboard with segate 40gb HDD.Windows 2000 was installed on that M/C i was forma...
Summary: I am trying to install OS/2 Version 4.5. I managed to load from the diskette 1, 2 but at diskette 3, error message occur. Have anyone encountered the ...
Summary: Hello Here is the senario: There are 2 servers, Primary and Standby Server. Both are connected through a high speed cable using a Vinca StandbyServer ...
Summary: Further to my fixpak problems, I backed out of fixpak15 to fixpak12, which I committed, and my COM2 port and digitizer are working fine. I do not have...
Summary: Have Win ME & Win XP on same computer a PII with an Asus CUV4X motherboard. My HP 600 monochrome printer is functional in Win Me but will NOT even in...
Summary: what can I do non-system disk or disk error replace and strick any key when ready i doen't recognize the c: drive i boot whit bootdisk 95 no success. ...
Summary: Hi, TRAP0008 is "Double fault". It reports a trap while processing another exception. Wich program are you running? It uses some config.sys device-dri...
Summary: My O2/2 computer crashed and now i get the above error. I don't want to lose the data that was previously stored on the hard drive. What should I do t...
Summary: Hi Guys, I need u r help, When I'm trying to connect for Ibm Os/2 client to Windows nt server , I can login succesfully , but when I try to connect t...
Summary: after what seems about 1/2 way through the boot process, i keep getting a cmos parity error, I replaced the motherboard, and I am getting the same thi...
Summary: I seem to be running into a lot of trap 000e errors when browsing the Internet. This is a very frustrating situation, since the only correction is to...
Summary: Warp4 no fixpacks P100 on Tyan Tomcat MB I've been trying to remove Xfolder by using the install.cmd. However, when I run it I get a SYS 2070 error w...
Summary: I just installed the operating system. On the first boot-up, I'm getting quite a few errors in the config.sys file. Such as the files os2dasd.dmd an...
Summary: I am recieving a SYS0005 error when I attempt to open a native file to read. Also I am looking for a NT client to attach an os/2 workstatoin - if any ...
Summary: get 3 errors on startup saying the following files aren't valid device driver files c:\mptn\protocol\sockets.sys c:\mptn\protocol\afos2.sys c:\mptn\pr...
Summary: i was getting TRAP 000e problem when ever i tried to boot my os/2 warp ver 3 system. But after doing rem the following line DEVICE=C:\OS2\MDOS\VCOM.S...
Summary: Hi when i boot warp 4.5 i become a doscall1.dll error : a program in this session encountred a problem and cannot continue. c0000005 doscall1.dll 0003...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
